Hi Team,
How to get the Latest Version changes in the LAVA Package for Single
Instance?
What is the Latest version released ?
Please let me know the "How to Upgrade the Lava package without disturbing
the existing test setup.
Here I have attached the Lava packages list in my current setup to run the
lava for reference. PFA.
Thanks & Regards,
Dhanunjaya. P
Hi Andrei,
Thanks for suggestion, I too had a same doubt before proceeding with the
upgrade.
I will try to setup the latest version in new system or i will take a
backup of existing setup and run the test.
Thanks & Regards,
Dhanunjaya. P
On Mon, Jan 27, 2020 at 2:24 PM Andrei Gansari <andrei.gansari(a)nxp.com>
wrote:
> Hello Dhanunjaya,
>
>
>
> These are the instructions on installing lava, you have to do something
> similar to this in order to upgrade:
>
> https://docs.lavasoftware.org/lava/installing_on_debian.html
>
>
>
> I’m not sure if it will break or not your current setup, so be cautious
> when upgrading, better backup if you have a live setup that is testing
> other boards.
>
>
>
> I’m not a currently maintaining a LAVA server so I don’t have experience
> updating from one version to another.
>
> Better you search the mailing list, ask on the mailing list or tryout on a
> virtual machine.
>
>
>
>
>
> Andrei
>
>
>
> *From:* dhanu msys <dhanuskd.palnati(a)gmail.com>
> *Sent:* Friday, January 24, 2020 12:44 PM
> *To:* Andrei Gansari <andrei.gansari(a)nxp.com>
> *Subject:* Re: [EXT] Re: [Lava-users] Test jobs to boot the target
> through JLink
>
>
>
> *Caution: *EXT Email
>
> Hi Andrei,
>
>
>
> Can you please share the procedure to upgrade to the latest lava version.
>
>
>
> Thanks in advance.
>
>
>
> Regards,
>
> Dhanunjaya. P
>
>
>
>
>
> On Thu, Jan 23, 2020 at 7:33 PM Andrei Gansari <andrei.gansari(a)nxp.com>
> wrote:
>
> From the screenshot it looks like you have a version of LAVA that does not
> support jlink boot method.
>
> JLink was added in version 2019.10-1
>
>
>
> Andrei
>
>
>
> *From:* dhanu msys <dhanuskd.palnati(a)gmail.com>
> *Sent:* Thursday, January 23, 2020 3:13 PM
> *To:* Andrei Gansari <andrei.gansari(a)nxp.com>
> *Cc:* Kumar Gala <kumar.gala(a)linaro.org>; Andrei Gansari <
> andrei.gansari(a)linaro.org>; lava-users <lava-users(a)lists.lavasoftware.org>
> *Subject:* Re: [EXT] Re: [Lava-users] Test jobs to boot the target
> through JLink
>
>
>
> *Caution: *EXT Email
>
> Hi Andrei,
>
>
>
> I run the test job based on the references shared by you.
>
>
>
> But , facing the error , while running the test job.
>
>
>
> Here I have attached the device template & device configuration files
> along with the error.
>
>
>
> Please find the attachments & please provide me the inputs.
>
>
>
> Thanks in Advance.
>
>
>
> Regards,
>
> Dhanunjaya. P
>
>
>
>
>
> On Tue, Jan 21, 2020 at 5:29 PM Andrei Gansari <andrei.gansari(a)nxp.com>
> wrote:
>
> Hello Dhanunjaya. P,
>
>
>
> You need to create a yaml file in
> lava/lava_dispatcher/tests/sample_jobs/fpga_a64-jlink.yaml … assuming you
> have already created the device fpga_a64.
>
>
>
> You have an example of FRDM-K64F booting cmsis-dap here:
>
>
> https://github.com/Linaro/lite-lava-docker-compose/blob/lite/example/lava.j…
> <https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.co…>
>
> You need to replace “method: cmsis-dap” -> “method: jlink”
>
>
>
> I didn’t run a clean lava environment, so I maybe missing something.
>
>
>
>
>
> Andrei G.
>
>
>
> *From:* dhanu msys <dhanuskd.palnati(a)gmail.com>
> *Sent:* Tuesday, January 21, 2020 12:31 PM
> *To:* Andrei Gansari <andrei.gansari(a)nxp.com>
> *Cc:* Kumar Gala <kumar.gala(a)linaro.org>; Andrei Gansari <
> andrei.gansari(a)linaro.org>; lava-users <lava-users(a)lists.lavasoftware.org>
> *Subject:* Re: [EXT] Re: [Lava-users] Test jobs to boot the target
> through JLink
>
>
>
> *Caution: *EXT Email
>
> Hi Andrei,
>
>
>
> Based on the information shared earlier , i have tried to configure the
> device type to make use of jlink based boot method test job , but i have
> faced an issue "Configuration Error: missing or invalid template*.* Jobs
> requesting this device type (fpga_a64) will not be able to start until a
> template is available on the master."
>
>
>
> Can you please check once and share the updated Device-Type Template also.
>
>
>
> Thanks & Regards,
>
> Dhanunjaya. P
>
>
>
>
>
> On Tue, Jan 21, 2020 at 3:28 PM dhanu msys <dhanuskd.palnati(a)gmail.com>
> wrote:
>
> Hi Andrei ,
>
> Hi Kumar,
>
>
>
> Can you please share some of the Test Job definition references to check
> the Jlink-based test jobs configurations.
>
>
>
> Thanks & Regards,
>
> Dhanunjaya. P
>
>
>
>
>
> On Tue, Nov 26, 2019 at 2:36 PM Andrei Gansari <andrei.gansari(a)nxp.com>
> wrote:
>
> I’ve tested lava+jlink on Cortex M with both onboard debugger and external
> debugger, like the one you referenced.
>
> You should change the following if needed:
>
>
>
> address:
>
> *0x00000000*
>
> options:
>
> - '-device *MK64FN1M0xxx12'*
>
> - '-if SWD'
>
> - '-speed 4000'
>
>
>
> The interface SWD is supported, not JTAG, that can be easily changed if
> you need to.
>
>
>
> Regards,
>
> Andrei
>
>
>
> *From:* Lava-users <lava-users-bounces(a)lists.lavasoftware.org> *On Behalf
> Of *dhanu msys
> *Sent:* Tuesday, November 26, 2019 7:49 AM
> *To:* Kumar Gala <kumar.gala(a)linaro.org>
> *Cc:* Andrei Gansari <andrei.gansari(a)linaro.org>; lava-users <
> lava-users(a)lists.lavasoftware.org>
> *Subject:* [EXT] Re: [Lava-users] Test jobs to boot the target through
> JLink
>
>
>
> *Caution: *EXT Email
>
> Hi Kumar,
>
>
>
> Thanks for sharing the reference.
>
>
>
> It's better to have some references for the test jobs submission also.
>
>
>
> Currently we are in initial phase to make use of LAVA , so we wants to
> check the feasibility to deploy through JLink based test jobs.
>
>
>
> Here I have provided the JLink Interface , which we are going to use for
> the development.
>
>
>
>
> https://www.thingbits.net/products/segger-j-link-base-jtag-swd-debugger?utm…
> <https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.thing…>
>
>
>
>
> Regards,
>
> Dhanunjaya. P
>
>
>
>
>
> On Sat, Nov 23, 2019 at 9:37 PM Kumar Gala <kumar.gala(a)linaro.org> wrote:
>
>
>
> > On Nov 21, 2019, at 11:06 PM, dhanu msys <dhanuskd.palnati(a)gmail.com>
> wrote:
> >
> > Hi Team,
> >
> > Can you please share some reference test jobs to run the tests using
> J-Link boot method.
>
> Here’s a reference to the board cfg side change for J-Link:
>
>
> https://github.com/agansari/lite-lava/blob/35a5bcbc01780638e6fd5e126bdfe180…
> <https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.co…>
>
> Andrei,
>
> Did you have a test job example to go along with this?
>
> - k
>
>
