Hi Remi
Thanks for the quick reply. Attached please find the document(the raw job log and the job definition).
Hello,
that's in fact maybe a bug in LAVA. To help me reproduce the error, could you send:
* the raw job log (click on "actions / plain logs" in the job page)
* the job definition
Thanks
Le jeu. 21 févr. 2019 à 04:05, Chenchun (coston) <chenchun7(a)huawei.com<mailto:chenchun7@huawei.com>> a écrit :
Dear Sir/Madam,
could you please help us analyze the problems encountered in recent Lava tests?
Detailed log in the attachment.
lava-dispatcher version: 2018.11+stretch.
The key information is as follows: Bug error: argument of type 'NoneType' is not iterable
Chase Qi preliminary positioning is a lava bug. We look forward to your reply.
Thank you for your assistance.
Best Regards,
Caili Liu
_______________________________________________
Lava-users mailing list
Lava-users(a)lists.lavasoftware.org<mailto:Lava-users@lists.lavasoftware.org>
https://lists.lavasoftware.org/mailman/listinfo/lava-users
--
Rémi Duraffort
LAVA Team, Linaro
Hello everyone,
I know from the LAVA documentation how to add metadata to jobs and test suites. When I look at test results, I see that test cases have metadata, too. E.g. https://validation.linaro.org/results/testcase/9759970 shows the following metadata:
case: linux-linaro-ubuntu-lscpu
definition: 0_smoke-tests-lxc
result: pass
Is there a possibility to add custom metadata to test cases?
Mit freundlichen Grüßen / Best regards
Tim Jaacks
DEVELOPMENT ENGINEER
Garz & Fricke GmbH
Tempowerkring 2
21079 Hamburg
Direct: +49 40 791 899 - 55
Fax: +49 40 791899 - 39
tim.jaacks(a)garz-fricke.com
www.garz-fricke.com
SOLUTIONS THAT COMPLETE!
Sitz der Gesellschaft: D-21079 Hamburg
Registergericht: Amtsgericht Hamburg, HRB 60514
Geschäftsführer: Matthias Fricke, Manfred Garz
Hi.
To make customized performance regression test job, I need to change
Lava job status as I want.
When I run test like kselftest, Lava dispatcher run test program under DUT.
And after finishing lava test job, Job state is always 'Complete'
whatever result(pass/fail) each test return.
Attached image file is about kselftest result from lava test job.
I want to make lava job status as 'Fail' or 'Canceled' when certain test
return fail.
I would like to ask your advice.
Best regards
Seoji Kim
Dear Sir/Madam,
could you please help us analyze the problems encountered in recent Lava tests?
Detailed log in the attachment.
lava-dispatcher version: 2018.11+stretch.
The key information is as follows: Bug error: argument of type 'NoneType' is not iterable
Chase Qi preliminary positioning is a lava bug. We look forward to your reply.
Thank you for your assistance.
Best Regards,
Caili Liu
Hi all,
Yesterday, we faced a weird issue with LAVA.
A job was running and returned an error saying "metadata is too long".
Right after that, the worker that was running the job went offline, and the
lava-master
raised an "unknown exception", making it crash.
In attachement, you will find the full job error saying metadata is too
long,
the full job log, and the lava-master.log when the exception occured.
Hope this helps.
Axel
I use next command to start lavadispatcher:
docker run -idt --net=host --privileged -v /dev:/dev -v /var/lib/lava/dispatcher/tmp:/var/lib/lava/dispatcher/tmp -e "DISPATCHER_HOSTNAME=--hostname=myname" -e "LOGGER_URL=tcp://master_ip:5555" -e "MASTER_URL=tcp://master_ip:5556" --name test_lava lavasoftware/lava-dispatcher:2019.01
In container, I start tftp and nfs. But the nfs always cannot be start successfully. I use "service nfs-kernel-server start" to start it, also before that I did "rpcbind".
The start shows below seems ok:
# service nfs-kernel-server start
[ ok ] Exporting directories for NFS kernel daemon....
[ ok ] Starting NFS kernel daemon: nfsd mountd.
But if do next we can see the nfs still not start.
# service nfs-kernel-server status
nfsd not running
Any suggestion?
Hello,
We've been using uboot-ums for WaRP7 but we've been having intermittent failures when it tried to run dd to flash the image.
Provided we need to look better into the root cause of this issue, we'd like to make the flashing phase a little more reliable.
I have few questions, coming from different angles:
* LAVA uses dd command to flash the image. Is there a way to specify the usage of bmap-tools?
* let's say dd times out (this is what usually happen). Is there a mechanism to restart the actions (deploy and boot) in case of timeout?
If you have any other suggestion, let me know!
Cheers
--
Diego Russo | Staff Software Engineer | Mbed Linux OS
ARM Ltd. CPC1, Capital Park, Cambridge Road, Fulbourn, CB21 5XE, United Kingdom
http://www.diegor.co.uk - https://os.mbed.com/linux-os/
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
Hi,
I have a test step that requires user input to a defined prompt.
Is there a way I can automate this in LAVA ?
I can see how we do this for Boot Actions and I've looked at interactive jobs that communicate to U-boot but these don't seem to fit my use case.
Thanks.
Pete
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
Hi All,
I am new to Android testing, I am using standard board *i.mx6/rpi3* and
flashed Android on it, I can connect with these board using "adb" tool.
I want to do some system test using LAVA framework, and I don't want to
reflash image every time(wants to test on the existing system). Can someone
please let me know how I can do Android testing on existing flashed image?
Thanks,
Ankit
Dear Lava users,
Our embedded SW offers 3 boot modes, selectable from u-boot.
When booting, u-boot offers the possibility to select the boot mode:
Select the boot mode
1: <boot mode 1>
2: <boot mode 2>
3: <boot mode 3>
Enter choice: 1: <boot mode 1>
<boot mode 1> is a default value, used after a counter has expired.
All this is done using the extlinux feature.
We have scripts that allow to select the boot mode, using Kermit. Now, we'd like to integrate this boot mode selection in a Lava job, and our current solution is not compatible.
In Lava we may boot the kernel, modify the extlinux configuration and reboot, but do you know a direct way (with interactive mode maybe) to select the boot mode from u-boot?
Best regards,
Denis
