lava-users

lava-users@lists.lavasoftware.org

1 participants
926 discussions

Default patterns and fixup dicts in Lava-Test Test Definition 1.0

by Neil Williams

https://git.lavasoftware.org/lava/lava/issues/179 If your Lava-Test Test Definition 1.0 YAML files explicitly use a parse: block (like: https://git.linaro.org/qa/test-definitions.git/tree/automated/linux/ltp/ltp…) then this will remain supported in Definition 1.0. If you use the monitors or interactive test actions, this does not affect you at all. If you rely on LAVA to create a TestCase based on a command in the Lava-Test Test Definition just echoing "pass" or "fail", then this is the Default Pattern and this change will directly affect those test jobs. The current Default Pattern and Fixup are lifted directly from V1 (https://git.lavasoftware.org/lava/lava/blob/master/lava_common/constants.py…): # V1 compatibility DEFAULT_V1_PATTERN = "(?P<test_case_id>.*-*)\\s+:\\s+(?P<result>(PASS|pass|FAIL|fail|SKIP|skip|UNKNOWN|unknown))" DEFAULT_V1_FIXUP = { "PASS": "pass", "FAIL": "fail", "SKIP": "skip", "UNKNOWN": "unknown", } We've recently updated the documentation to drop mention of the default pattern support for the following reasons: * It has always been problematic to encode a Python regular expression in YAML. Failures are difficult to debug and patterns are global for the entire test operation. * The move towards more portable test definitions puts the emphasis on parsing the test output locally on the DUT using a customised parser. This has further advantages: * The pattern does not have to be mangled into YAML * The pattern can be implemented by a language other than Python * The pattern can change during the operation of the test shell, e.g. a different pattern may be required for setup than for the test itself. We are now starting to plan for Lava-Test Test Definition 2.0 with an emphasis on requiring portable test scripts and removing more of the lava_test_shell Test Helper scripts. Full information on 2.0 will be available early in 2019. As a first step, the generally unhelpful Default Pattern and Default Fixup dict are likely to be removed. If you need this support, the pattern can be added to your Lava-Test Test Definition 1.0 YAML files. In the next release, it is proposed that unless an explicit pattern is specified in the Lava-Test Test Definition 1.0 YAML file, then no pattern will be implemented. Processes which echo "pass" or "fail" would be ignored and no TestCase would be created. Let us know if there are any thoughts or problems on this proposal. -- Neil Williams ============= neil.williams(a)linaro.org http://www.linux.codehelp.co.uk/

6 years, 6 months

Lava job always exits when running a long duration test case without outputs

by Chuan Su

Dear all, We are encountered with an issue that our job always exits halfway when running a long duration test case (around 20 minutes) which outputs nothing , and lava server reports an InfrastructureError error and prints as below : Connection closed by foreign host.Marking unfinished test run as failed definition: lava result: fail case: 0_apache-servers1 uuid: 597_1.4.2.4.1 duration: 603.53 lava_test_shell connection dropped.end: 3.1 lava-test-shell (duration 00:10:05) [ns_s1] namespace: ns_s1 extra: ... definition: lava level: 3.1 result: fail case: lava-test-shell duration: 604.55 lava-test-retry failed: 1 of 1 attempts. 'lava_test_shell connection dropped.'lava_test_shell connection dropped. And we just test it with a very simple python script as below: #!/usr/bin/env python3 import time print('Hello,world!') time.sleep(1200) print("Hello,Lava!") We can see 'Hello,world!' string outputs , but there's no more output of this program found on webUI! We just don't know what's wrong , so we have to mail to you for help! Sincerely, Chuan Su

6 years, 6 months

Git authentication

by Axel Lebourhis

Hi everyone, Is it possible to handle git authentication in a test job ? I need LAVA to clone a repo that can't be set to public, and obviously it won't work because of the authentication step. So is it possible to specify a password or a token ? Best regards, Axel

6 years, 6 months

LAVA webUI hangs when test case outputs long string in a line

by Chuan Su

Dear , all We found that when lava executed a script which may output a long string (more than 30000 bytes) in a line (only one line break), lava web UI always hung and there was no more lava log outputting and devices under test (short for DUT) were still powered until Lava Job time-out function triggered , however, after checked the whole log file we found that cases behind the hanging case were executed (there's new files generated) . So the problem is that when lava encountered those cases lava web UI always hangs and DUTs may not be powered off when all the cases are completed ! best wishes, Chuan Su

6 years, 6 months

LAVA webUI hangs when test case outputs long string in a line

by Chuan Su

6 years, 6 months

Re: [Lava-users] Steps for restoring a backup

by Tim Jaacks

On Mon, 11 Dec 2018 at 11:30, Neil Williams <neil.williams at linaro.org> wrote: > On Tue, 11 Dec 2018 at 11:28, Tim Jaacks <tim.jaacks(a)garz-fricke.com> wrote: > > > > Thanks, the CLI operations are very helpful for automating the process. > > However, the docs say that all devices in "Reserved" state have to > > have their "current job" cleared. I can use "lava-server manage devices details" > > to check whether this field is actually set. There is no command to > > modify it, though. Seems like using the Python API is the only way to > > go here, right? The same applies to setting "Running" jobs to "Cancelled". > > https://git.lavasoftware.org/lava/lava/merge_requests/273 > > This should get into the upcoming 2018.12 release. Thank you very much for your quick help. The "lava-server manage jobs fail" command takes care of clearing the "current job" field of the associated device, do I understand that right? Mit freundlichen Grüßen / Best regards Tim Jaacks DEVELOPMENT ENGINEER Garz & Fricke GmbH Tempowerkring 2 21079 Hamburg Direct: +49 40 791 899 - 55 Fax: +49 40 791899 - 39 tim.jaacks(a)garz-fricke.com www.garz-fricke.com WE MAKE IT YOURS! Sitz der Gesellschaft: D-21079 Hamburg Registergericht: Amtsgericht Hamburg, HRB 60514 Geschäftsführer: Matthias Fricke, Manfred Garz, Marc-Michael Braun

6 years, 6 months

MultiNode Tradefed-runner with session retry

by Karsten Tausche

Hi folks, We at Fairphone have developed a variant of the Tradefed-runner in LAVA test-definitions that is meant to run complete Tradefed test suites on multiple devices by making use of the shards feature in Tradefed. The runner is currently in “staging” state. We still want to share now what we are using and developing to see if there are more people with interest in it. Feedback on the general approach taken would also be much appreciated. On the higher level, our setup works as follows: • Use MultiNode to allocate multiple devices for one test submission. • One “master” runs the Tradefed shell, similarly as in the existing runner. • The master connects to the workers’ DUTs via adb TCP/IP. These DUTs are transparently available to Tradefed just in the same way as USB-attached devices. • Workers ensure that their respective DUTs remain accessible to the master, especially in case of WLAN disconnects, reboots, crashes, etc. Major features of our runner: • Support for Android CTS, GTS and STS. • Test run split into “shards” in Tradefed to run tests in parallel on multiple devices. This allows for a major speedup when running large test suites. • Tradefed retry: Rerun test suites until the failure count stabilizes. • No adb root required. • Based on the original Tradefed runner, having at least parts of the common code moved to python libraries. Current limitations: • Test executions are not always stable. This needs further investigation. • Test executions produce more false positives than local test runs. This needs further investigation but is at least partially due to using adb TCP/IP instead of a local USB connection. • Android VTS not implemented (would require only minor changes) Our current changes have been pushed to the tradefed_shards_with_retry topic on Gerrit[1]. Besides the two major changes to add MultiNode adb support and then Tradefed support on top of that, a couple of smaller changes that could be useful on their own have also been pushed. We are looking forward to your feedback and to joint efforts in automating and speeding up Tradefed test executions! Best regards, Karsten for the Fairphone Software Team [1] https://review.linaro.org/q/topic:%22tradefed_shards_with_retry%22+(status:…

6 years, 6 months

Re: [Lava-users] Steps for restoring a backup

by Tim Jaacks

On Mon, 10 Dec 2018 at 20:16, Neil Williams <neil.williams at linaro.org> wrote: > Yes, there is a problem there - thanks for catching it. I think the > bulk of the page dates from the last stages of the migration when V1 > data was still around. I'll look at an update of the page tomorrow. > Step 7 is a sanity check that the install of the empty instance has > gone well, Step 9 is to ensure that the newly restored database is put > into maintenance as soon as possible to prevent any queued test jobs > from attempting to start. The critical element of Step 9 is to ensure > that the lava-master service is stopped. > > The emphasis of the section is on ensuring that the instance only > serves a "Maintenance" page, e.g. the default Debian "It works!" > apache page, to prevent access to the instance during the restore. Thanks for pointing that out, Neil. I got the point, that the Apache server has to serve a static site during the restore process. > Accessing the UI would involve having an alternative way to serve the > pages. If that can be arranged, just for admins, (e.g. by changing the > external routing to the box or redirecting DNS temporarily) then the > UI on the instance can be used with the change that the > lava-server-gunicorn service does not need to be stopped (because > access has been redirected). Other services would be stopped. However, > this would involve a fair number of apache config changes, so is best > left to those admins who have such config already on hand. > > The operations can be done from the command line and that's probably > best for these docs. > > Step 7 can be replaced by: > > lava-server manage check --deploy > > Step 9 can be replaced by looping over: > > lava-server manage devices update --health MAINTENANCE --hostname ${HOSTNAME} > > or, if there are a lot of devices: > > lava-server manage maintenance --force > > (This maintenance helper has been fixed in master - soon to be 2018.12 > - so older versions would use the first command & loop.) Thanks, the CLI operations are very helpful for automating the process. However, the docs say that all devices in "Reserved" state have to have their "current job" cleared. I can use "lava-server manage devices details" to check whether this field is actually set. There is no command to modify it, though. Seems like using the Python API is the only way to go here, right? The same applies to setting "Running" jobs to "Cancelled". > I'll look at changing the page to use CLI operations for steps 7 and > 9. Some labs can do the http redirect / routing method but the detail > of that is probably not in scope for this page in the LAVA docs. I'll > add a note that admins have that choice but leave it for those admins > to implement. Mit freundlichen Grüßen / Best regards Tim Jaacks DEVELOPMENT ENGINEER Garz & Fricke GmbH Tempowerkring 2 21079 Hamburg Direct: +49 40 791 899 - 55 Fax: +49 40 791899 - 39 tim.jaacks(a)garz-fricke.com www.garz-fricke.com WE MAKE IT YOURS! Sitz der Gesellschaft: D-21079 Hamburg Registergericht: Amtsgericht Hamburg, HRB 60514 Geschäftsführer: Matthias Fricke, Manfred Garz, Marc-Michael Braun

6 years, 6 months

Steps for restoring a backup

by Tim Jaacks

Hello everyone, I am trying to implement a backup and restore routine for our LAVA server, based on the documentation: https://validation.linaro.org/static/docs/v2/admin-backups.html#restoring-a… The creation of the backup is straight-forward. I have problems with the order of the proposed restore steps, though. Step 6 is "Stop all LAVA services". However, afterwards in step 7 it says "Make sure that this instance actually works by browsing a few (empty) instance pages." This should obviously be done before, right? The actual problem is that step 9 says "In the Django administration interface, take all devices which are not Retired into Offline". This cannot be an ordering issue, because the LAVA services actually must not be available during these modifications. How do I use the Django admin interface, while all LAVA services are stopped? Mit freundlichen Grüßen / Best regards Tim Jaacks DEVELOPMENT ENGINEER Garz & Fricke GmbH Tempowerkring 2 21079 Hamburg Direct: +49 40 791 899 - 55 Fax: +49 40 791899 - 39 tim.jaacks(a)garz-fricke.com www.garz-fricke.com WE MAKE IT YOURS! Sitz der Gesellschaft: D-21079 Hamburg Registergericht: Amtsgericht Hamburg, HRB 60514 Geschäftsführer: Matthias Fricke, Manfred Garz, Marc-Michael Braun

6 years, 6 months

How to switch device-type base jinja with only one device?

by Larry Shen

Dear all, I have a question when use lava. Background: 1. I have only one hardware device with android. 2. I have a device-type jinja2 file start with "{% extends 'base-fastboot.jinja2' %}" Here, I use "adb reboot bootloader" to enter in to fastboot. 3. I have another device-type jinja2 file start with "{% extends 'base-uboot.jinja2' %}" Here, I use "fastboot 0" in uboot to enter in to fastboot. Now, we have a scenario which need to test with above both methods, but we just have one device, if possible user can define some parameter in job.yaml, then can switch between the two methods just for one device? Any suggestion? Thanks, Larry

6 years, 6 months

← Newer
1
...
52
53
54
55
56
57
58
...
93
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

lava-users