lava-users

lava-users@lists.lavasoftware.org

4 participants
907 discussions

Board At Desk v1.0, a downstream of LAVA and kernelci, just released.

by Agustin Benito Bethencourt

Hi, CIP just released Board At Desk v1.0 which is based on LAVAv2 and kernelci. Link: https://www.cip-project.org/blog/2017/10/18/cip-launches-bd-v1-0 From those involved in this release, thanks to all of you who make these technologies possible and also to those involved in kernelci.org project. Thank you also for your support these past months. Best Regards -- Agustin Benito Bethencourt Principal Consultant - FOSS at Codethink agustin.benito(a)codethink.co.uk

6 years, 11 months

Re: [Lava-users] Help running an inline test

by Neil Williams

On 26 Sep 2017 2:59 am, "Daniel Sangorrin" <daniel.sangorrin(a)toshiba.co.jp> wrote: Hi Neil, > -----Original Message----- > From: Neil Williams [mailto:neil.williams@linaro.org] > Sent: Tuesday, September 12, 2017 5:49 PM > To: Daniel Sangorrin > Cc: Robert Marshall; Lava Users Mailman list > Subject: Re: [Lava-users] Help running an inline test > > On 12 September 2017 at 09:25, Daniel Sangorrin > <daniel.sangorrin(a)toshiba.co.jp> wrote: > > > >> -----Original Message----- > >> From: Neil Williams [mailto:neil.williams@linaro.org] > >> Sent: Tuesday, September 12, 2017 4:58 PM > >> To: Daniel Sangorrin > >> Cc: Robert Marshall; Lava Users Mailman list > >> Subject: Re: [Lava-users] Help running an inline test > >> > >> On 12 September 2017 at 08:50, Daniel Sangorrin > >> <daniel.sangorrin(a)toshiba.co.jp> wrote: > >> > Hi Neil, > >> > > >> > Thanks for your reply. > >> > > >> >> -----Original Message----- > >> >> From: Neil Williams [mailto:neil.williams@linaro.org] > >> >> Sent: Tuesday, September 12, 2017 4:16 PM > >> >> To: Daniel Sangorrin > >> >> Cc: Robert Marshall; Lava Users Mailman list > >> >> Subject: Re: [Lava-users] Help running an inline test > >> >> > >> >> On 12 September 2017 at 08:10, Daniel Sangorrin > >> >> <daniel.sangorrin(a)toshiba.co.jp> wrote: > >> >> > Robert, Neil: > >> >> > > >> >> > I managed to prepare a 2017.7 environment. The boot action still works fine. > >> >> > The test action still fails, but in a more 'sane' way I would say. > >> >> > There are strange things like 'None', no lava-test-runner, etc.. Please check the > >> >> > log attached. > >> >> > >> >> You haven't specified a deploy step, so there is no test shell > >> >> created. Boot just does the boot - to deploy the test environment > >> >> there must be a deploy action. > >> > > >> > As far as I understand, the deployment action occurs before the > >> > boot action and consists of preparing a kernel/filesystem in some > >> > media (e.g.: as a network filesystem). > >> > Ref: https://validation.linaro.org/static/docs/v2/actions-deploy.html > >> > > >> > For now, I wanted to run my tests with the kernel and filesystem > >> > that is already installed on the Flash memory. Is this impossible with LAVA? > >> > >> Such a system can only be booted, it cannot operate a Lava Test Shell > >> because there is no way to get the test shell onto the device without > >> a deploy. > >> > >> There is support for primary connections using SSH > >> https://validation.linaro.org/static/docs/v2/dispatcher- design.html#primary-connection > >> > >> See: Problems with simplistic testing in the documentation. > >> https://validation.linaro.org/static/docs/v2/simple-admin. html#problems-with-simplistic-testing > > > > Thanks a lot Neil. > > # I'm not against deployment, I just wanted to prepare the environment step by step. > > > > The primary connection could be a good solution but it looks like I wouldn't be able to use the PDU, > > or the autologin features from the u-boot action through the serial port. I will implement the > > deploy action instead. > > > > By the way, when you talk about "test shell" I am assuming that you mean a shell script or binary > > that is copied into the target filesystem and executed. Is that correct? > > My filesystem is very minimal: basically busybox using the ash shell. > > "test shell" == Lava Test Shell as defined by the test action block. > This relies on POSIX behaviour where the automation drives scripts > installed onto the system to execute the test operations themselves. > > To handle busybox ash compatibility, just set the Operating System as > Open Embedded. > > actions: > - deploy: > # ... rest of the deploy > os: oe > > https://validation.linaro.org/static/docs/v2/actions-deploy.html#index-18 Sorry, it took me a while but I finally got it working. I met several problems. Some of them were a matter of overriding variables. For example, I cannot use dhcp for the board so I had to change uboot_ipaddr_cmd and base_ip_args. There was one variable (SERVER_IP) I couldn't override, so I had to modify base-uboot.jinja2 for it. my jinja2: {% set uboot_serverip = '192.168.1.66' %} base-uboot.jinja2 # vi /etc/lava-server/dispatcher-config/device-types/base-uboot.jinja2 {% set base_uboot_tftp_bootcmd = uboot_tftp_bootcmd|default( " - setenv bootcmd '" + uboot_ipaddr_cmd|default('dhcp') + "; setenv serverip " + uboot_serverip|default('{SERVER_IP}') + "; run loadkernel; run loadinitrd; " + run_load_fdt + uboot_bootx_cmd|default('{BOOTX}') + "' - run bootcmd") -%} Note: I tried modifying LAVA_SERVER_IP and LAVA_NETWORK_IFACE in /etc/lava-dispatcher/lava-dispatcher.conf as well but it didn't work. Those settings are only relevant for V1, so V2 tests will ignore these. Setting the SERVER_IP in the device configuration is the wrong approach. This IP address is for the dispatcher, so it needs to be added to the dispatcher configuration. In V2, the dispatcher configuration is sent from the master. Setting a fixed IP address for the dispatcher is already supported. See /usr/share/lava-dispatcher/dispatcher.yaml for an example. See https://validation.linaro.org/static/docs/v2/pipeline-admin.html#extra-disp… You need a file named according to the hostname of the dispatcher as it appears in the dispatcher-master log file. If you consider it useful, please consider including it in the mainstream code. Thanks for your help, Daniel > >> >> >> -----Original Message----- > >> >> >> From: Lava-users [mailto:lava-users-bounces@lists.linaro.org] On Behalf Of Daniel Sangorrin > >> >> >> Sent: Monday, September 11, 2017 5:16 PM > >> >> >> To: 'Robert Marshall'; 'Lava Users Mailman list' > >> >> >> Subject: Re: [Lava-users] Help running an inline test > >> >> >> > >> >> >> > -----Original Message----- > >> >> >> > From: Lava-users [mailto:lava-users-bounces@lists.linaro.org] On Behalf Of Robert Marshall > >> >> >> > Sent: Monday, September 11, 2017 4:47 PM > >> >> >> > To: 'Lava Users Mailman list' > >> >> >> > Subject: Re: [Lava-users] Help running an inline test > >> >> >> > > >> >> >> > "Daniel Sangorrin" <daniel.sangorrin(a)toshiba.co.jp> writes: > >> >> >> > > >> >> >> > > Hi Neil, > >> >> >> > > > >> >> >> > > Thanks for your quick reply. > >> >> >> > > > >> >> >> > >> -----Original Message----- > >> >> >> > >> From: Neil Williams [mailto:neil.williams@linaro.org] > >> >> >> > >> Sent: Monday, September 11, 2017 3:23 PM > >> >> >> > >> > >> >> >> > >> On 11 September 2017 at 07:06, Daniel Sangorrin > >> >> >> > >> <daniel.sangorrin(a)toshiba.co.jp> wrote: > >> >> >> > >> > Hi, > >> >> >> > >> > > >> >> >> > >> > I have spent a few days learning LAVA with QEMU and the Beagle Bone black. > >> >> >> > >> > Now, I'm trying to setup a Renesas iwg20m board but I have some strange > >> >> >> > >> > problem. > >> >> >> > >> > # I'm using LAVA v2016.12. > >> >> >> > >> > >> >> >> > >> Updates are available - you should follow the LAVA documentation for > >> >> >> > >> the LAVA repositories and upgrade. > >> >> >> > >> > >> >> >> > >> https://staging.validation.linaro.org/static/docs/v2/ installing_on_debian.html#lava-repositories > >> >> >> > > > >> >> >> > > Thanks, I will try with the 2017.9 version then. > >> >> >> > > > >> >> >> > Daniel > >> >> >> > > >> >> >> > If you're doing the test within b@d [1] you should look at my > >> >> >> > https://gitlab.com/rajm/board-at-desk-single-dev/tree/ lava2017-fixes > >> >> >> > branch which has various fixes for our use of lava 2017-7, once that > >> >> >> > branch is merged - soon now! - it should 'just work' > >> >> >> > >> >> >> Wow Robert, just in time! Thanks. > >> >> >> > >> >> >> Daniel > >> >> >> > >> >> >> > >> >> >> _______________________________________________ > >> >> >> Lava-users mailing list > >> >> >> Lava-users(a)lists.linaro.org > >> >> >> https://lists.linaro.org/mailman/listinfo/lava-users > >> >> > > >> >> > _______________________________________________ > >> >> > Lava-users mailing list > >> >> > Lava-users(a)lists.linaro.org > >> >> > https://lists.linaro.org/mailman/listinfo/lava-users > >> >> > > >> >> > >> >> > >> >> > >> >> -- > >> >> > >> >> Neil Williams > >> >> ============= > >> >> neil.williams(a)linaro.org > >> >> http://www.linux.codehelp.co.uk/ > >> > > >> > > >> > > >> > >> > >> > >> -- > >> > >> Neil Williams > >> ============= > >> neil.williams(a)linaro.org > >> http://www.linux.codehelp.co.uk/ > > > > > > > > > > -- > > Neil Williams > ============= > neil.williams(a)linaro.org > http://www.linux.codehelp.co.uk/

6 years, 11 months

Help running an inline test

by Daniel Sangorrin

Hi, I have spent a few days learning LAVA with QEMU and the Beagle Bone black. Now, I'm trying to setup a Renesas iwg20m board but I have some strange problem. # I'm using LAVA v2016.12. The actions in the job definition looks as follows (sorry pastebin is blocked by our proxy): actions: - boot: method: u-boot commands: msd type: uimage auto_login: login_prompt: '$none$ login: ' username: root prompts: - 'myiwg20m: # ' timeout: minutes: 2 failure_retry: 5 - test: timeout: minutes: 5 failure_retry: 3 name: kernel-version-singlenode definitions: - repository: metadata: format: Lava-Test Test Definition 1.0 name: kernel-version-basic description: "check kernel version" run: steps: - lava-test-case linux-INLINE-uname --shell uname -a from: inline name: kernel-version-inline path: inline/kernel-version-basic.yaml So far LAVA has been successful at powering on the board, interrupting u-boot, sending the u-boot commands, recognizing the boot login prompt and auto-login in. In other words, the boot actions seems to be working fine. The problem comes with the 'test' action. I have mostly copied the code from the inline example included in the help but I get the following errors: (sorry again for not pasting it on pastebin) - {"dt": "2017-09-11T05:19:03.602576", "lvl": "target", "msg": "Debian GNU/Linux 8 (none) /dev/ttySC0"} - {"dt": "2017-09-11T05:19:03.605709", "lvl": "debug", "msg": "Matched prompt #6: \$none\$ login: "} - {"dt": "2017-09-11T05:19:03.606979", "lvl": "debug", "msg": "Sending username root"} - {"dt": "2017-09-11T05:19:03.608100", "lvl": "debug", "msg": {"sending": "root\n"}} - {"dt": "2017-09-11T05:19:03.864073", "lvl": "target", "msg": "(none) login: root"} - {"dt": "2017-09-11T05:19:03.865475", "lvl": "debug", "msg": "auto-login-action: Wait for prompt ['myiwg20m: # ']. 120 seconds"} - {"dt": "2017-09-11T05:19:03.868416", "lvl": "target", "msg": "root"} - {"dt": "2017-09-11T05:19:03.898283", "lvl": "target", "msg": ""} - {"dt": "2017-09-11T05:19:03.904742", "lvl": "target", "msg": "The programs included with the Debian GNU/Linux system are free software;"} - {"dt": "2017-09-11T05:19:03.911114", "lvl": "target", "msg": "the exact distribution terms for each program are described in the"} - {"dt": "2017-09-11T05:19:03.915433", "lvl": "target", "msg": "individual files in /usr/share/doc/*/copyright."} - {"dt": "2017-09-11T05:19:03.921821", "lvl": "target", "msg": "Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent"} - {"dt": "2017-09-11T05:19:03.923941", "lvl": "target", "msg": "permitted by applicable law."} - {"dt": "2017-09-11T05:19:03.927111", "lvl": "target", "msg": "login[816]: root login on 'ttySC0'"} - {"dt": "2017-09-11T05:19:03.928112", "lvl": "target", "msg": ""} - {"dt": "2017-09-11T05:19:03.933510", "lvl": "target", "msg": "BusyBox v1.22.1 (2017-09-01 01:37:39 UTC) built-in shell (ash)"} - {"dt": "2017-09-11T05:19:03.937734", "lvl": "target", "msg": "Enter 'help' for a list of built-in commands."} - {"dt": "2017-09-11T05:19:03.938979", "lvl": "debug", "msg": "Setting shell prompt(s) to ['myiwg20m: # ', 'lava-test: # ']"} - {"dt": "2017-09-11T05:19:03.939504", "lvl": "debug", "msg": {"sending": "export PS1=\"lava-test: # \"\n"}} - {"dt": "2017-09-11T05:19:05.310766", "lvl": "target", "msg": "myiwg20m: # [6nexport PS1=\\\"lava-test: # \\\""} - {"dt": "2017-09-11T05:19:05.311542", "lvl": "debug", "msg": "auto-login-action duration: 3.93"} - {"dt": "2017-09-11T05:19:05.312062", "lvl": "results", "msg": {"case": "auto-login-action", "definition": "lava", "duration": !!float "3.929234027862549", "extra": !!python/object/apply:collections.OrderedDict [[["success", "No kernel warnings or errors detected."]]], "level": "1.5.5", "result": "pass"}} - {"dt": "2017-09-11T05:19:05.313427", "lvl": "debug", "msg": "start: 1.5.6 expect-shell-connection (max 120s)"} - {"dt": "2017-09-11T05:19:05.313967", "lvl": "debug", "msg": "expect-shell-connection: Waiting for prompt myiwg20m: # , lava-test: # "} - {"dt": "2017-09-11T05:19:05.314522", "lvl": "debug", "msg": "expect-shell-connection: Wait for prompt ['myiwg20m: # ', 'lava-test: # ']. 300 seconds"} - {"dt": "2017-09-11T05:19:05.315249", "lvl": "target", "msg": "export PS1=\\\"lava-test: # \\\""} - {"dt": "2017-09-11T05:19:05.315963", "lvl": "debug", "msg": "expect-shell-connection duration: 0.00"} - {"dt": "2017-09-11T05:19:05.316851", "lvl": "debug", "msg": "start: 1.5.7 export-device-env (max 120s)"} - {"dt": "2017-09-11T05:19:05.317390", "lvl": "debug", "msg": "export-device-env duration: 0.00"} - {"dt": "2017-09-11T05:19:05.317890", "lvl": "debug", "msg": "Setting default test shell prompt"} - {"dt": "2017-09-11T05:19:05.318373", "lvl": "debug", "msg": ["myiwg20m: # ", "lava-test: # "]} - {"dt": "2017-09-11T05:19:05.318902", "lvl": "debug", "msg": "uboot-retry: Wait for prompt ['myiwg20m: # ', 'lava-test: # ']. 240 seconds"} - {"dt": "2017-09-11T05:19:05.339032", "lvl": "debug", "msg": "uboot-retry duration: 8.48"} - {"dt": "2017-09-11T05:19:05.339643", "lvl": "info", "msg": "uboot-action duration: 8.50"} - {"dt": "2017-09-11T05:19:05.340189", "lvl": "info", "msg": "start: 2 lava-test-retry (max 300s)"} - {"dt": "2017-09-11T05:19:05.340724", "lvl": "debug", "msg": "start: 2.1 lava-test-shell (max 300s)"} - {"dt": "2017-09-11T05:19:05.341253", "lvl": "info", "msg": "Executing test definitions using ShellSession"} - {"dt": "2017-09-11T05:19:05.341753", "lvl": "debug", "msg": {"sending": "#\n"}} - {"dt": "2017-09-11T05:19:05.442940", "lvl": "target", "msg": "lava-test: # [6n#"} - {"dt": "2017-09-11T05:19:05.443483", "lvl": "debug", "msg": "lava-test-shell: Wait for prompt ['myiwg20m: # ', 'lava-test: # ']. 300 seconds"} - {"dt": "2017-09-11T05:19:05.446189", "lvl": "target", "msg": "#"} - {"dt": "2017-09-11T05:19:05.469109", "lvl": "exception", "msg": "Traceback (most recent call last):\n File \"/usr/lib/python2.7/dist-packages/lava_dispatcher/pipeline/action.py\", line 290, in run_actions\n new_connection = action.run(connection, args)\n File \"/usr/lib/python2.7/dist-packages/lava_dispatcher/pipeline/actions/test/shell.py\", line 243, in run\n for running in xrange(stage + 1):\nTypeError: unsupported operand type(s) for +: 'NoneType' and 'int'\n"} - {"dt": "2017-09-11T05:19:05.470260", "lvl": "debug", "msg": "start: 3.1 power_off (max 5s)"} - {"dt": "2017-09-11T05:19:05.470796", "lvl": "info", "msg": "nice curl http://admin:<omitted>@192.168.11.68/set.cmd?cmd=setpower+p61=0"} - {"dt": "2017-09-11T05:19:05.534407", "lvl": "debug", "msg": !!python/unicode "command output % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0\r100 20 0 20 0 0 371 0 --:--:-- --:--:-- --:--:-- 377\n<html>p61=0</html>\r\n"} - {"dt": "2017-09-11T05:19:05.535945", "lvl": "debug", "msg": "power_off duration: 0.07"} - {"dt": "2017-09-11T05:19:05.536462", "lvl": "results", "msg": {"case": "power_off", "definition": "lava", "duration": !!float "0.06516695022583008", "extra": !!python/object/apply:collections.OrderedDict [[["status", "success"]]], "level": "3.1", "result": "pass"}} - {"dt": "2017-09-11T05:19:05.644487", "lvl": "error", "msg": "Status: Incomplete\nErrors ['Traceback (most recent call last): File \"/usr/lib/python2.7/dist-packages/lava_dispatcher/pipeline/action.py\", line 290, in run_actions new_connection = action.run(connection, args) File \"/usr/lib/python2.7/dist-packages/lava_dispatcher/pipeline/actions/test/shell.py\", line 243, in run for running in xrange(stage + 1):TypeError: unsupported operand type(s) for +: \\'NoneType\\' and \\'int\\'', 'Incomplete']"} - {"dt": "2017-09-11T05:19:05.646006", "lvl": "exception", "msg": "Traceback (most recent call last):\n File \"/usr/lib/python2.7/dist-packages/lava_dispatcher/pipeline/action.py\", line 290, in run_actions\n new_connection = action.run(connection, args)\n File \"/usr/lib/python2.7/dist-packages/lava_dispatcher/pipeline/logical.py\", line 57, in run\n new_connection = self.internal_pipeline.run_actions(connection)\n File \"/usr/lib/python2.7/dist-packages/lava_dispatcher/pipeline/action.py\", line 302, in run_actions\n raise RuntimeError(action.errors)\nRuntimeError: ['Traceback (most recent call last): File \"/usr/lib/python2.7/dist-packages/lava_dispatcher/pipeline/action.py\", line 290, in run_actions new_connection = action.run(connection, args) File \"/usr/lib/python2.7/dist-packages/lava_dispatcher/pipeline/actions/test/shell.py\", line 243, in run for running in xrange(stage + 1):TypeError: unsupported operand type(s) for +: \\'NoneType\\' and \\'int\\'']\n"} - {"dt": "2017-09-11T05:19:05.647870", "lvl": "debug", "msg": "start: 3.1 power_off (max 5s)"} - {"dt": "2017-09-11T05:19:05.648393", "lvl": "debug", "msg": "power_off duration: 0.00"} - {"dt": "2017-09-11T05:19:05.648864", "lvl": "results", "msg": {"case": "power_off", "definition": "lava", "duration": !!float "3.0994415283203125e-05", "extra": !!python/object/apply:collections.OrderedDict [[["status", "success"], ["duration", !!float "0.06516695022583008"], ["connection-timeout", !!float "300.0"], ["timeout", !!float "5.0"], ["level", "3.1"]]], "level": "3.1", "result": "pass"}} - {"dt": "2017-09-11T05:19:05.650619", "lvl": "error", "msg": "status: ['Incomplete']"} Any hint of what's going on? # One thing I don't understand is that even though I have set the "prompts" variable on the job, LAVA seems to force it to become "lava-test: #". Thanks, Daniel

6 years, 11 months

Using specific branch of a test definition repository

by Xu, Hongyu

Hi lava experts : The branch did not take effect when I specified the branch in my test-definition! (hxt-dev-br1) I use the local git repo , and my test-definition is in branch :hxt-dev-br1, not the master. Then I specified the branch, but it did not take effect. My test-definition: device_type: qemu job_name: health check job timeouts: job: minutes: 15 action: minutes: 5 connection: minutes: 2 priority: medium visibility: public # context allows specific values to be overridden or included context: # tell the qemu template which architecture is being tested # the template uses that to ensure that qemu-system-x86_64 is executed. arch: amd64 metadata: # please change these fields when modifying this job for your own tests. docs-source: first-job docs-filename: qemu-pipeline-first-job.yaml # ACTION_BLOCK actions: - deploy: timeout: minutes: 90 to: tmpfs images: rootfs: image_arg: -drive format=raw,file={rootfs} url: http://autotest002/tmp/stretch-2.img.gz compression: gz os: debian # BOOT_BLOCK - boot: timeout: minutes: 2 method: qemu media: tmpfs prompts: ["root@debian:"] auto_login: login_prompt: "login:" username: root - test: timeout: minutes: 30 definitions: - repository: ssh://1680141@10.5.20.24:29418/sw_test/test-definitions from: git path: ubuntu/smoke-tests-basic.yaml name: smoke-tests-basic branch: hxt-dev-br1 Log: Loading test definitionsstart: 1.3.3.1 git-repo-action (timeout 00:14:55)Using /lava-48 at stage 0Fetching tests from ssh://1680141@10.5.20.24:29418/sw_test/test-definitionsRunning '/usr/bin/git clone ssh://1680141@10.5.20.24:29418/sw_test/test-definitions /var/lib/lava/dispatcher/tmp/48/lava-overlay-Iw36n8/lava-48/0/tests/0_smoke-tests-basic'Tests stored (tmp) in /var/lib/lava/dispatcher/tmp/48/lava-overlay-Iw36n8/lava-48/0/tests/0_smoke-tests-basic/ubuntu/smoke-tests-basic.yamlUnable to open test definition 'ubuntu/smoke-tests-basic.yaml': [Errno 2] No such file or directory: '/var/lib/lava/dispatcher/tmp/48/lava-overlay-Iw36n8/lava-48/0/tests/0_smoke-tests-basic/ubuntu/smoke-tests-basic.yaml' Best Regards XuHongyu From: Lava-users [mailto:lava-users-bounces@lists.linaro.org] On Behalf Of Xu, Hongyu Sent: 2017年9月18日 18:07 To: Lava-users(a)lists.linaro.org Subject: [Lava-users] test-definitions Hi lava , Can I put test-definitions(.yaml script ) in locally on my worker server ? Don’t get them from the git-repo! Best Regards XuHongyu This email is intended only for the named addressee. It may contain information that is confidential/private, legally privileged, or copyright-protected, and you should handle it accordingly. If you are not the intended recipient, you do not have legal rights to retain, copy, or distribute this email or its contents, and should promptly delete the email and all electronic copies in your system; do not retain copies in any media. If you have received this email in error, please notify the sender promptly. Thank you. This email is intended only for the named addressee. It may contain information that is confidential/private, legally privileged, or copyright-protected, and you should handle it accordingly. If you are not the intended recipient, you do not have legal rights to retain, copy, or distribute this email or its contents, and should promptly delete the email and all electronic copies in your system; do not retain copies in any media. If you have received this email in error, please notify the sender promptly. Thank you.

7 years

test-definitions

by Xu, Hongyu

Hi lava , Can I put test-definitions(.yaml script ) in locally on my worker server ? Don't get them from the git-repo! Best Regards XuHongyu This email is intended only for the named addressee. It may contain information that is confidential/private, legally privileged, or copyright-protected, and you should handle it accordingly. If you are not the intended recipient, you do not have legal rights to retain, copy, or distribute this email or its contents, and should promptly delete the email and all electronic copies in your system; do not retain copies in any media. If you have received this email in error, please notify the sender promptly. Thank you.

7 years

lava-tool auth token

by Xu, Hongyu

Hi experts, It's error when I auth token with the lava-too, because my I deploy the lava 2017.7 with SSL Self-signed certificate. Now I can use the XML-RPC to auth the token with " ssl._create_unverified_context ". How can I do ? I want use the lava-tool . import ssl ssl._create_default_https_context = ssl._create_unverified_context import xmlrpclib username = "lavaadmin" token = "onku07n16r2uktjz40otgn0n9m7q1bp1b75dr4u0ph0juy7jnb8csi0u9x7fg3sf1mpgnxw00sq1otmzl3rqpdu4tl5fam45m5xyt25oin020ohkajzrx7ze0aaukkdt" hostname = "autotest001" protocol = "https" # http or preferably https server = xmlrpclib.ServerProxy("%s://%s:%s@%s/RPC2" % (protocol, username, token, hostname)) device_hostname = "qemu_test01" jinjia_string = " {% extends 'qemu.jinja2' %} {% set mac_addr = '52:54:00:12:34:60' %} {% set memory = '1024' %} " > lava-tool auth-add --token-file /home/lavaadmin/xuhy/qemu_test_token https://1680141@10.5.21.5/RPC2 > > ERROR: <urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate > verify failed (_ssl.c:661)> Best Regards XuHongyu -----Original Message----- From: Xu, Hongyu Sent: 2017年9月12日 14:47 To: 'Neil Williams' <neil.williams(a)linaro.org> Cc: Lava-users(a)lists.linaro.org Subject: RE: [Lava-users] auth token We deploy the lava on the Internal lan, an the domain names is private . But let's Encrypt can only issue certificates for valid public domain names. Are there any other Suggestions? Best Regards XuHongyu -----Original Message----- From: Neil Williams [mailto:neil.williams@linaro.org] Sent: 2017年9月11日 15:35 To: Xu, Hongyu <hongyu.xu(a)hxt-semitech.com> Cc: Lava-users(a)lists.linaro.org Subject: Re: [Lava-users] auth token On 11 September 2017 at 08:28, Xu, Hongyu <hongyu.xu(a)hxt-semitech.com> wrote: > Hi lava experts: > > > > I deploy the lava 2017.7 with SSL Self-signed certificate, then I > want to create the device-dictionary for the qemu devices, it’s error > when I add auth_token. Please give me some suggest! > > That needs to be fixed within your own SSL configuration. Lots of security packages have issues with self-signed certificates, so it is better to look at solutions like letsencrypt. Details of how this is configured are outside the scope of the lava-users mailing list, it's a general system admin task and a variety of guides are available online. > > lava-tool auth-add --token-file /home/lavaadmin/xuhy/qemu_test_token > --user-shortcut 1680141 --endpoint-shortcut qemu_test01 > https://1680141@10.5.21.5 > > ERROR: <urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate > verify failed (_ssl.c:661)> > > > > Best Regards > > > > XuHongyu > > > > From: Xu, Hongyu > Sent: 2017年9月4日 14:41 > To: 'Lava-users(a)lists.linaro.org' <Lava-users(a)lists.linaro.org> > Subject: Local Django user accounts > > > > > > Hi all, > > > > I have installed the lava-serer (2017.7) on my DEBIAN 9.10. But now > I can’t sign in with the local Django user, this is the error infomations: > > Forbidden (403) > > CSRF verification failed. Request aborted. > > You are seeing this message because this site requires a CSRF cookie > when submitting forms. This cookie is required for security reasons, > to ensure that your browser is not being hijacked by third parties. > > If you have configured your browser to disable cookies, please > re-enable them, at least for this site, or for 'same-origin' requests. > > More information is available with DEBUG=True. > > This is already covered in the documentation, it's a Django change. If you have tried to solve this by using a self-signed certificate on localhost, you should avoid trying to create https://localhost/ and just update the security settings: https://staging.validation.linaro.org/static/docs/v2/pipeline-debug.html?hi… > > Please give me some advices! > > > > root@hxtcorp:~# dpkg-query -l lava* > > Desired=Unknown/Install/Remove/Purge/Hold > > | > Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Tri > g-pend > > |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) > > ||/ Name Version Architecture > Description > > +++-=================================-=====================-========== > +++===========-======================================================= > +++================ > > ii lava-coordinator 0.1.7-1 all > LAVA Coordinator daemon > > un lava-dashboard <none> <none> > (no description available) > > un lava-dashboard-tool <none> <none> > (no description available) > > ii lava-dispatcher 2017.7-1~bpo9+1 amd64 > Linaro Automated Validation Architecture dispatcher > > un lava-scheduler <none> <none> > (no description available) > > un lava-scheduler-tool <none> <none> > (no description available) > > ii lava-server 2017.7-1~bpo9+1 all > Linaro Automated Validation Architecture server > > ii lava-server-doc 2017.7-1~bpo9+1 all > Linaro Automated Validation Architecture documentation > > ii lava-tool 0.21-1 all > command line utility for LAVA > > un lavapdu <none> <none> > (no description available) > > ii lavapdu-client 0.0.5-1 all > LAVA PDU client > > ii lavapdu-daemon 0.0.5-1 all > LAVA PDU control daemon > > > > add the local Django user: > > sudo lava-server manage createsuperuser --username $USERNAME > --email=$EMAIL > > sudo lava-server manage authorize_superuser --username $USERNAME > > > > root@hxtcorp:/etc/lava-server# lava-server manage users list > > List of users: > > * 1680077 > > * 1680141 > > * lava-health > > * xuhy > > > > Best Regards > > > > XuHongyu > > > > > > > This email is intended only for the named addressee. It may contain > information that is confidential/private, legally privileged, or > copyright-protected, and you should handle it accordingly. If you are > not the intended recipient, you do not have legal rights to retain, > copy, or distribute this email or its contents, and should promptly > delete the email and all electronic copies in your system; do not retain copies in any media. > If you have received this email in error, please notify the sender promptly. > Thank you. > > > > > _______________________________________________ > Lava-users mailing list > Lava-users(a)lists.linaro.org > https://lists.linaro.org/mailman/listinfo/lava-users > -- Neil Williams ============= neil.williams(a)linaro.org http://www.linux.codehelp.co.uk/ This email is intended only for the named addressee. It may contain information that is confidential/private, legally privileged, or copyright-protected, and you should handle it accordingly. If you are not the intended recipient, you do not have legal rights to retain, copy, or distribute this email or its contents, and should promptly delete the email and all electronic copies in your system; do not retain copies in any media. If you have received this email in error, please notify the sender promptly. Thank you.

7 years

FYI: Problem updating device type

by Daniel Sangorrin

Just in case other users had the same problem I opened this issue: https://github.com/kernelci/lava-docker/issues/7 Cheers, Daniel

7 years

pduclient

by Li, Xuelian

Hi，Neil： I want to control device power on/off by lavapdu.,but when I run pduclient --daemon autotest001 --hostname 10.5.142.6 --command off --port 10 ERROR : Error sending command, wrong daemon hostname? Can you help me solve this problem? Lava-server :IP 10.5.21.5 autotest001 Pdudaemon run on the lava-server Lavapdu.conf: { "daemon": { "hostname": "10.5.21.5", "port": 16421, "dbhost": "127.0.0.1", "dbuser": "pdudaemon", "dbpass": "pdudaemon", "dbname": "lavapdu", "retries": 5, "logging_level": "INFO" }, "pdus": { "192.168.10.2": { "driver": "apc9210" }, "192.168.10.3": { "driver": "apc7952", "telnetport": 5023 }, "192.168.10.4": { "driver": "apc7952" }, "192.168.10.5": { "driver": "apc8959", "this": "that", "something": "else" }, "192.168.25.52": { "driver": "apc7952" } } This email is intended only for the named addressee. It may contain information that is confidential/private, legally privileged, or copyright-protected, and you should handle it accordingly. If you are not the intended recipient, you do not have legal rights to retain, copy, or distribute this email or its contents, and should promptly delete the email and all electronic copies in your system; do not retain copies in any media. If you have received this email in error, please notify the sender promptly. Thank you.

7 years

auth token

by Xu, Hongyu

Hi lava experts: I deploy the lava 2017.7 with SSL Self-signed certificate, then I want to create the device-dictionary for the qemu devices, it’s error when I add auth_token. Please give me some suggest! lava-tool auth-add --token-file /home/lavaadmin/xuhy/qemu_test_token --user-shortcut 1680141 --endpoint-shortcut qemu_test01 https://1680141@10.5.21.5 ERROR: <urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:661)> Best Regards XuHongyu From: Xu, Hongyu Sent: 2017年9月4日 14:41 To: 'Lava-users(a)lists.linaro.org' <Lava-users(a)lists.linaro.org> Subject: Local Django user accounts Hi all, I have installed the lava-serer (2017.7) on my DEBIAN 9.10. But now I can’t sign in with the local Django user, this is the error infomations: Forbidden (403) CSRF verification failed. Request aborted. You are seeing this message because this site requires a CSRF cookie when submitting forms. This cookie is required for security reasons, to ensure that your browser is not being hijacked by third parties. If you have configured your browser to disable cookies, please re-enable them, at least for this site, or for 'same-origin' requests. More information is available with DEBUG=True. Please give me some advices! root@hxtcorp:~# dpkg-query -l lava* Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-=================================-=====================-=====================-======================================================================= ii lava-coordinator 0.1.7-1 all LAVA Coordinator daemon un lava-dashboard <none> <none> (no description available) un lava-dashboard-tool <none> <none> (no description available) ii lava-dispatcher 2017.7-1~bpo9+1 amd64 Linaro Automated Validation Architecture dispatcher un lava-scheduler <none> <none> (no description available) un lava-scheduler-tool <none> <none> (no description available) ii lava-server 2017.7-1~bpo9+1 all Linaro Automated Validation Architecture server ii lava-server-doc 2017.7-1~bpo9+1 all Linaro Automated Validation Architecture documentation ii lava-tool 0.21-1 all command line utility for LAVA un lavapdu <none> <none> (no description available) ii lavapdu-client 0.0.5-1 all LAVA PDU client ii lavapdu-daemon 0.0.5-1 all LAVA PDU control daemon add the local Django user: sudo lava-server manage createsuperuser --username $USERNAME --email=$EMAIL sudo lava-server manage authorize_superuser --username $USERNAME root@hxtcorp:/etc/lava-server# lava-server manage users list List of users: * 1680077 * 1680141 * lava-health * xuhy Best Regards XuHongyu This email is intended only for the named addressee. It may contain information that is confidential/private, legally privileged, or copyright-protected, and you should handle it accordingly. If you are not the intended recipient, you do not have legal rights to retain, copy, or distribute this email or its contents, and should promptly delete the email and all electronic copies in your system; do not retain copies in any media. If you have received this email in error, please notify the sender promptly. Thank you.

7 years

adding a device dictionary in 2017.7

by Daniel Sangorrin

Hi, I upgraded to LAVA 2017.7 (for now I'm using https://github.com/kernelci/lava-docker) and managed to add my device-type and device as follows: # Note: I didn't know how to update to 2017.9 docker# lava-server manage device-types add renesas-iwg20m docker# lava-server manage devices add --device-type renesas-iwg20m --worker lava-docker iwg20m01 However, when I want to add the device dictionary I get an error. # Note: I am following https://validation.linaro.org/static/docs/v2/pipeline-admin.html First, I tried with "lava-server manage device-dictionary" as in the documentation, but I failed: docker# lava-server manage device-dictionary Unknown command: 'device-dictionary' Is this only available in the 2017.9 version? Then, I tried with " lava-tool device-dictionary localhost lava-docker --update myiwg20m.jinja2" but I get: Updating device dictionary for lava-docker on localhost ERROR: Endpoint URL not found in the authorization list: localhost [Note] my lava-tool is version 0.23-1 (the newest according to apt) Now, there is a section saying "Using the command line The device dictionary exists as a jinja2 file in /etc/lava-server/dispatcher-config/devices and can be updated by admins with the necessary access.". Is this equivalent to using lava-server o lava-tool to install a device dictionary?? Others: - I confirmed that Pipeline device? is checked. - Django administration > Devices: what is the meaning of Hostname? I have a value of iwg20m01 (the name of the device), there is no relation with the server/container's hostname, is there? - There is an authentication token for the user 'kernel-ci' Thanks, Daniel

7 years

← Newer
1
...
75
76
77
78
79
80
81
...
91
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

lava-users