Sorry, but I didnt understand about what commands are you talking about?

Flash image via fastboot flash. And once I successfully did it. But my device has problem with fastboot reboot-bootloader(some times pass some times fails) and I want to remove fastboot reboot-bootloader.
Communication with device via serial connection. 

Ilya. 


From: Milosz Wasilewski <milosz.wasilewski@linaro.org>
Sent: Thursday, September 5, 2019 3:56:52 PM
To: Ilya Fedusiv <ilya.f@l4b-software.com>
Cc: lava-users@lists.lavasoftware.org <lava-users@lists.lavasoftware.org>
Subject: Re: [Lava-users] Fastboot reboot-bootloader
 
Your 'commands' section is missing entirely. You need either of:
connection_command
user_commands
connection_list
to add this section to the rendered dictionary. Without it default
value will be used.

Beside that, how does LAVA interact with your device without connection_command?


milosz

On Thu, 5 Sep 2019 at 13:33, Ilya Fedusiv <ilya.f@l4b-software.com> wrote:
>
> Rendered device.
> https://pastebin.com/BGMTi1SZ
>
> I just change file, save it. Update web page. And it looks like that device description is updated.
>
> Ilya
> ________________________________
> From: Milosz Wasilewski <milosz.wasilewski@linaro.org>
> Sent: Thursday, September 5, 2019 3:22:55 PM
> To: Ilya Fedusiv <ilya.f@l4b-software.com>
> Cc: lava-users@lists.lavasoftware.org <lava-users@lists.lavasoftware.org>
> Subject: Re: [Lava-users] Fastboot reboot-bootloader
>
> Than you're not changing it in the right place. How does the rendered
> device dictionary look like?
>
> milosz
>
> On Thu, 5 Sep 2019 at 13:20, Ilya Fedusiv <ilya.f@l4b-software.com> wrote:
> >
> > No, result same.
> > Lava still runs that command
> >
> > nice fastboot -s 861a1c59 reboot-bootloader
> >
> > ________________________________
> > From: Milosz Wasilewski <milosz.wasilewski@linaro.org>
> > Sent: Thursday, September 5, 2019 3:16:04 PM
> > To: Ilya Fedusiv <ilya.f@l4b-software.com>
> > Cc: lava-users@lists.lavasoftware.org <lava-users@lists.lavasoftware.org>
> > Subject: Re: [Lava-users] Fastboot reboot-bootloader
> >
> > On Thu, 5 Sep 2019 at 13:13, Ilya Fedusiv <ilya.f@l4b-software.com> wrote:
> > >
> > > It doesnt help.
> > > Maybe I made wrong description.
> > >
> > > Device desc:
> > > https://pastebin.com/1uUw2shL
> >
> > Try this:
> > {% set soft_reboot_command = 'pwd' %}
> >
> > milosz
> >
> > >
> > > Log:
> > > https://pastebin.com/ZyNbduP6
> > >
> > > Ilya
> > >
> > > ________________________________
> > > From: Milosz Wasilewski <milosz.wasilewski@linaro.org>
> > > Sent: Thursday, September 5, 2019 2:19:01 PM
> > > To: Ilya Fedusiv <ilya.f@l4b-software.com>
> > > Cc: lava-users@lists.lavasoftware.org <lava-users@lists.lavasoftware.org>
> > > Subject: Re: [Lava-users] Fastboot reboot-bootloader
> > >
> > > On Thu, 5 Sep 2019 at 10:16, Ilya Fedusiv <ilya.f@l4b-software.com> wrote:
> > > >
> > > > Hi!
> > > >
> > > > Lava as default at beginning runs that command:
> > > >
> > > > nice fastboot -s 261a1c5d reboot-bootloader
> > >
> > > This is coming from base-fastboot template
> > > {% set soft_reboot_command = soft_reboot_command|default('adb -s ' +
> > > fastboot_serial_number + ' reboot bootloader') %}
> > >
> > > So to prevent it you need to set soft_reboot_command in your device dictionary.
> > >
> > > milosz
> > >
> > > >
> > > >
> > > > Is it possible to avoid this step? Dont run this command
> > > >
> > > > Ilya
> > > >
> > > > _______________________________________________
> > > > Lava-users mailing list
> > > > Lava-users@lists.lavasoftware.org
> > > > https://lists.lavasoftware.org/mailman/listinfo/lava-users