Hi LAVA Users,
Is it possible to use "deploy: to: iso-installer" to flash the board with ADB via Wifi?
george
-----Original Message----- From: Lava-users lava-users-bounces@lists.lavasoftware.org On Behalf Of George Nistor Sent: Thursday, August 22, 2019 4:16 PM To: lava-users@lists.lavasoftware.org Subject: [Lava-users] to: iso-installer and flash with adb using wifi
Hi Lava Users,
I have decided to continue using a real device: a Raspberry Pi 3 B+. Because I have an iso with Android 9 Pie, to flash the board I want to use deploy: to: iso-installer
The question I'm having is: Is it possible to use this mode to flash the board with ADB via Wifi?
(The board, I connected wifi to our router and I am able to connect with adb using wifi) (The board does not have USB/OTG interface so the only option is to use ADB on wifi.)
What I try to achieve is deploy the image I have - iso one (flash), with adb using wifi, and run as tests CTS and VTS.
george
-----Original Message----- From: Milosz Wasilewski milosz.wasilewski@linaro.org Sent: Wednesday, August 21, 2019 11:27 AM To: George Nistor george.n@l4b-software.com Cc: lava-users@lists.lavasoftware.org Subject: Re: [Lava-users] old comercial phones supported by Lava
On Wed, 21 Aug 2019 at 08:00, George Nistor george.n@l4b-software.com wrote:
Hi,
But I do not understand exactly for example if I can use a Nexus5x; the device is in the list of supported devices Steve McIntyre sent me. Milosz Wasilewski said I cannot use it with Lava due to the lack of possibility to force power cycle on them (via serial interface - USB).
our current use case doesn't require power cycling the device. It uses the same OS build and tests are executed in chroot environment. This is pretty specific setup for the use case (doesn't require changing kernel).
To be able to use it requires hw modification of the device?
yes, you need to be able to forcibly power cycle the device. With battery inside the phone this isn't possible, so you have to remove battery and replace it with power supply you can turn off.
What we want to have for the moment is a real device (ex, Nexus 5) on which to run Tradef with Lava.
What is your use case? Are you testing tradefed (ex CTS) changes and stick with the same Android build or do you test Android (kernel, libraries, etc) changes? If it's the former you might be lucky and use existing nexus5 support. If you want to test android using CTS, HW modification is necessary.
milosz
george
-----Original Message----- From: Steve McIntyre steve.mcintyre@linaro.org Sent: Tuesday, August 20, 2019 8:51 PM To: George Nistor george.n@l4b-software.com Cc: lava-users@lists.lavasoftware.org Subject: Re: [Lava-users] real devices supported by Lava by default
Hi George,
On Tue, Aug 20, 2019 at 12:54:21PM +0000, George Nistor wrote:
I have a question regarding real devices supported by Linaro Lava.
Besides these dev boards I found here : https://validation.linaro.org/static/ docs/v2/standard-armmp-ramdisk-bbb.html#standard-known-devices
Are any other real devices supported in Lava by default? (any commercial phone for example Nexus 5)?
There's a huge set of supported devices. If you don't already have LAVA installed, the easiest way to find the list is by looking at the set of device type configurations at
https://git.lavasoftware.org/lava/lava/tree/master/etc/dispatcher-conf ig/device-types
Cheers,
Steve McIntyre steve.mcintyre@linaro.org http://www.linaro.org/ Linaro.org | Open source software for ARM SoCs
Lava-users mailing list Lava-users@lists.lavasoftware.org https://lists.lavasoftware.org/mailman/listinfo/lava-users
_______________________________________________ Lava-users mailing list Lava-users@lists.lavasoftware.org https://lists.lavasoftware.org/mailman/listinfo/lava-users