Hello Team,
Good Day to All!
We are setting up a new device into LAVA Automation with the following requirements.
Flash panel to R4 image Copy delta to R5 Deploy R5 reboot Make sure the panel boots to R5
The Test definition i'm using is as follows: actions: - deploy: to: flasher images: package: url: https://artifactory.softwaretools.com/artifactory/mfgtools-***-0v3 - boot: timeout: minutes: 15 commands: - boot method: u-boot prompts: - 'root@hon-grip' auto_login: login_prompt: 'login: ' username: root password_prompt: 'Password:' password: root login_commands: - coredump --enable - sysinfo - ifconfig - networkctl status - wget http://192.100.**.**/oslat - ostree static-delta apply-offline /home/root/oslat - ostree admin deploy 35b3297cf3e4bc59d2a21e2ae9f7a02ef3f7a940e37389a7e9ae66a610c60b7 - reboot After reboot command is executed, the panel again prompts for login and password, whereas I cannot declare auto_login for the second time.
Please let me know how to disable auto login after the reboot (for second time login)
Best Regards *Pavan Kumar*