Hi Remi,
Can you point me to an example which is using the ‘connection_list’ parameter ?
Regards, Bhargav
From: Remi Duraffort [mailto:remi.duraffort@linaro.org] Sent: 20 October 2020 06:31 PM To: DAS, BHARGAV BHARGAV_DAS@mentor.com Cc: lava-users@lists.lavasoftware.org Subject: Re: [Lava-users] Error while using uuu boot method
Hello,
you are not specifying the connection_list for this specific device, only the connection_command. This is not enough for uuu that requires a connection_list.
Rgds
Le lun. 19 oct. 2020 à 15:51, DAS, BHARGAV <BHARGAV_DAS@mentor.commailto:BHARGAV_DAS@mentor.com> a écrit : Hi Remi,
Please check the attached rendered yaml.
Regards, Bhargav
From: Remi Duraffort [mailto:remi.duraffort@linaro.orgmailto:remi.duraffort@linaro.org] Sent: 19 October 2020 04:45 PM To: DAS, BHARGAV <BHARGAV_DAS@mentor.commailto:BHARGAV_DAS@mentor.com> Cc: lava-users@lists.lavasoftware.orgmailto:lava-users@lists.lavasoftware.org Subject: Re: [Lava-users] Error while using uuu boot method
Hello,
could you paste the device dictionary after the rendering? Click on "Rendered YAML" tab.
Rgds
Le mer. 14 oct. 2020 à 14:11, DAS, BHARGAV <BHARGAV_DAS@mentor.commailto:BHARGAV_DAS@mentor.com> a écrit : Hi Remi, After adding these line in the device dictionary as you suggested I was able to successfully execute my job in a imx6 device
{% set connection_list = ['uart0'] %} {% set connection_tags = {'uart0': ['primary', 'telnet']} %} {% set connection_commands = {'uart0': 'telnet staging01 7106'} %}
But now when I am trying to execute a similar job in imx8mmini device, I am again getting the same error
Job error: Invalid job data: ['Unable to connect to shell - missing connections block.']
Here is my device dictionary
{% extends 'imx8mm-evk.jinja2' %} {% set device_type = 'imx8mm-evk' %} {% set soft_reset_command = 'reboot' %} {% set soft_reboot_command = 'reboot' %} {% set connection_list = ['uart0'] %} {% set connection_tags = {'uart0': ['primary', 'telnet']} %} {% set connection_commands = {'uart0': 'telnet localhost 8007'} %} {% set uboot_bootcmd = 'bootm 0x40480000' %} {% set uuu_usb_otg_path = '3:2' %} {% set uuu_corrupt_boot_media_command = ['mmc dev 1', 'mmc erase 0 0x400'] %} {% set bootloader_prompt = 'u-boot=>' %} {% set shutdown_message = 'Restarting system' %} {% set power_off_command = '/usr/bin/pduclient --daemon 34.86.60.229 --hostname 34.86.254.21 --command off --port 15' %} {% set hard_reset_command = '/usr/bin/pduclient --daemon 34.86.60.229 --hostname 34.86.254.21 --command reboot --port 15' %} {% set power_on_command = '/usr/bin/pduclient --daemon 34.86.60.229 --hostname 34.86.254.21 --command on --port 15' %}
Regards, Bhargav
From: Remi Duraffort [mailto:remi.duraffort@linaro.orgmailto:remi.duraffort@linaro.org] Sent: 08 October 2020 10:13 PM To: DAS, BHARGAV <BHARGAV_DAS@mentor.commailto:BHARGAV_DAS@mentor.com> Cc: lava-users@lists.lavasoftware.orgmailto:lava-users@lists.lavasoftware.org Subject: Re: [Lava-users] Error while using uuu boot method
Le jeu. 8 oct. 2020 à 18:31, DAS, BHARGAV <BHARGAV_DAS@mentor.commailto:BHARGAV_DAS@mentor.com> a écrit : Hi Remi, In the following line ‘uart0’ needs to be obtained from the worker where the target is connected or it is just a tag ? {% set connection_list = ['uart0'] %}
This name is just an internal reference to indicate to lava that it should use "uart0" from the connection command:
{% set connection_commands = {'uart0': 'telnet staging01 7106'} %}
Also, as I have mentioned in another server I am not facing this issue even that target doesn’t have the connection commands in the device dictionary.
Regards, Bhargav
From: Remi Duraffort [mailto:remi.duraffort@linaro.orgmailto:remi.duraffort@linaro.org] Sent: 08 October 2020 09:52 PM To: DAS, BHARGAV <BHARGAV_DAS@mentor.commailto:BHARGAV_DAS@mentor.com> Cc: lava-users@lists.lavasoftware.orgmailto:lava-users@lists.lavasoftware.org Subject: Re: [Lava-users] Error while using uuu boot method
Hello,
this is due to a misconfiguration of your device. The device dictionary is missing the connection commands.
See https://staging.validation.linaro.org/scheduler/device/staging-black02/devic...
{% set connection_list = ['uart0'] %} {% set connection_tags = {'uart0': ['primary', 'telnet']} %} {% set connection_commands = {'uart0': 'telnet staging01 7106'} %}
Rgds
Le jeu. 8 oct. 2020 à 16:38, DAS, BHARGAV <BHARGAV_DAS@mentor.commailto:BHARGAV_DAS@mentor.com> a écrit : Hi Lava users,
I am getting “ Job error: Invalid job data: ['Unable to connect to shell - missing connections block.'] “ error while submitting jobs which is using ‘uuu’ deploy and boot method.
Same job I am using in a different server and there it is working perfectly. Both the servers are using same version.
Please check the attached job yaml file (uuu-job.yaml) and the job log (uuu-job-fail-log.txt).
Regards, Bhargav _______________________________________________ Lava-users mailing list Lava-users@lists.lavasoftware.orgmailto:Lava-users@lists.lavasoftware.org https://lists.lavasoftware.org/mailman/listinfo/lava-users
-- Rémi Duraffort LAVA Architect Linaro
-- Rémi Duraffort LAVA Architect Linaro
-- Rémi Duraffort LAVA Architect Linaro
-- Rémi Duraffort LAVA Architect Linaro