Smita,

Yes I looked and confirm that analysis, you've not commented on what the U-Boot prompt is?

I'm putting lava-users back on the cc list in case others wish to comment, and making my comment below clearer

Robert

"Gumansingh, Smita" Smita_Gumansingh@mentor.com writes:

Hi Robert,

Have you got any chance to see my bbb health check log

bbb health check fails at this point

---

send-reboot-commands timed out after 179 seconds end: 2.4.1.1 send-reboot-commands (duration 00:02:59)

---

Please have a look on this log https://pastebin.com/gPmMG84J

Thanks & Regards, Smita Gumansingh

---

From: Robert Marshall robert.marshall@codethink.co.uk Sent: Wednesday, January 10, 2018 6:21 PM To: Gumansingh, Smita Subject: Re: [Lava-users] No result coming when job submitted in lava

Smita

Though you only to replace that line *if* the U-Boot prompt doesn't

^ need

consist of "U-Boot⇒" - interrupt the BBB boot to see what it actually is, and if it is necessary, you also need to remove the other line - apologies for the instructions not being clear here.

Thanks for the fuller output in the other email!

Robert

"Gumansingh, Smita" Smita_Gumansingh@mentor.com writes:

...

Thanks Robert for the quick response

Currently u-boot is showing in /etc/lava-server/dispatcher-config/device-types/beaglebone-black.jinja2 is:

{% set bootloader_prompt = bootloader_prompt|default('U-Boot') %}

As you suggested I added the line: {% set bootloader_prompt = bootloader_prompt|default('⇒') %} and submitted a job

No output from the job when submitted...

Thanks & Regards, Smita Gumansingh

---

From: Robert Marshall robert.marshall@codethink.co.uk Sent: Wednesday, January 10, 2018 5:08 PM To: Gumansingh, Smita Cc: lava-users@lists.linaro.org Subject: Re: [Lava-users] No result coming when job submitted in lava

Hi, some comments below!

"Gumansingh, Smita" Smita_Gumansingh@mentor.com writes:

...

Hi, I am new to lava and trying to submit a job on lava scheduler ,job submitted nut no result is coming. I am trying to test the CIP Kernel on the Beaglebone Black(board is physically connected to my linux machine). Health checkup is working somehow .

By 'somehow' do you mean the health check is completing correctly and the device is shown as online?

...

I am following the steps from here https://wiki.linuxfoundation.org/civilinfrastructureplatform/ciptestingrefer...

Pre-requise:

1. I have built(cip_v4.4.92) the CIP Kernel with Kernel CI as the steps mentioned in

https://wiki.linuxfoundation.org/civilinfrastructureplatform/cipsystembuildh... 2.Target is booted and up and flashed with debian 4.9 rootfs

What is the U-Boot prompt with this version, if it is ⇒ rather than U-Boot⇒

on the vagrant machine you need to

sudo vi /etc/lava-server/dispatcher-config/device-types/beaglebone-black.jinja2 And add the line: {% set bootloader_prompt = bootloader_prompt|default('⇒') %}

...

Job Definination is pasted here

https://pastebin.com/YwnPXidK

Need help for going further !!!!

Do you get any output from the job?

...

Thanks & Regards, Smita Gumansingh

Robert