Hi Nagendra,

I suspect the auto-login action functionality. Please try to test by avoiding auto-login functionality.

We can nail down/avoid the auto-login functionality issue like below.

Steps: ###### 1. Boot the target manually and login 2. Make sure you will get login prompt 3. Run reset/reboot command 4. Check whether we will get to see the console log in the LAVA result page.

Best of luck!

Note: 1. You can use below "-boot" section

" - boot: timeout: minutes: 2 method: minimal soft_reboot: ["reset;pwd;reset"] parameters: shutdown-message: ["< Please mention shutdown message > "] boot-message: [" < Please mention boot message "] "

Regards, Koti On Thu, 22 Apr 2021 at 21:33, lava-users-request@lists.lavasoftware.org wrote:

Send Lava-users mailing list submissions to lava-users@lists.lavasoftware.org

To subscribe or unsubscribe via the World Wide Web, visit https://lists.lavasoftware.org/mailman/listinfo/lava-users or, via email, send a message with subject or body 'help' to lava-users-request@lists.lavasoftware.org

You can reach the person managing the list at lava-users-owner@lists.lavasoftware.org

When replying, please edit your Subject line so it is more specific than "Re: Contents of Lava-users digest..."

Today's Topics:

1. Unable to get kernel boot messages in to lava job while using lava framework & telnet (Nagendra Singamsetti)
2. Notify on finish does not hold duration (Westermann, Oliver)

---

Message: 1 Date: Thu, 22 Apr 2021 17:53:31 +0530 From: Nagendra Singamsetti nag.singam91@gmail.com To: lava-users@lists.lavasoftware.org Subject: [Lava-users] Unable to get kernel boot messages in to lava job while using lava framework & telnet Message-ID: <CAFhg_Wste+2=zO51aA3GOq-BjwbUx76rms= gF8Rv-hKNCOeQVQ@mail.gmail.com> Content-Type: text/plain; charset="utf-8"

Hi ,

I am trying to automate the linux boot functionality on my custom boards using LAVA framework. Previously I have done it on Renesas board using LAVA it works fine.I got linux boot messages on lava job whereas i am not getting with customised board.

*Issue: *I am using trace32 debugger to flash images onto the board (working fine). After that i am calling minimal method in pipeline job to get prompt strings/login But i am not getting the linux boot messages on the job. always stucks at the following: [common] connect-device Connecting to device using 'telnet 10.10.0.18 4000' http://10.10.0.69/scheduler/job/789#L136Setting prompt string to ['lava-test: # '] http://10.10.0.69/scheduler/job/789#L137end: 2.3 connect-device (duration 00:00:00) [common] http://10.10.0.69/scheduler/job/789#L138end: 2 boot-trace32-image (duration 00:00:28) [common] http://10.10.0.69/scheduler/job/789#action_3start: 3 minimal-boot (timeout 00:03:00) [common] http://10.10.0.69/scheduler/job/789#action_3-1start: 3.1 connect-device (timeout 00:03:00) [common] <http://10.10.0.69/scheduler/job/789#L141

...

Already

connected http://10.10.0.69/scheduler/job/789#L142end: 3.1 connect-device (duration 00:00:00) [common] http://10.10.0.69/scheduler/job/789#action_3-2start: 3.2 auto-login-action (timeout 00:03:00) [common] http://10.10.0.69/scheduler/job/789#L144Setting prompt string to ['Booting Linux'] <http://10.10.0.69/scheduler/job/789#L145

...

auto-login-action:

Wait for prompt ['Booting Linux'] (timeout 00:03:00) http://10.10.0.69/scheduler/job/789#L146Trying 10.10.0.18... http://10.10.0.69/scheduler/job/789#L147Connected to 10.10.0.18. http://10.10.0.69/scheduler/job/789#L148Escape character is '^]'. http://10.10.0.69/scheduler/job/789#L149 http://10.10.0.69/scheduler/job/789#L150alif_asic01 4000 [115200 N81] http://10.10.0.69/scheduler/job/789#L151 http://10.10.0.69/scheduler/job/789#L152auto-login-action timed out after 180 seconds http://10.10.0.69/scheduler/job/789#L153end: 3.2 auto-login-action (duration 00:03:00) [common]

*Both telnet & serial server(ser2net) is configured.* *Uart cable attached with serial server: usb-Profolic_Technology_Inc._Usb-serial_Controller-ifoo-port0*

i am getting boot log messages using telnet manually but not with lava.

*Manual log with telnet:* $ telnet 10.10.0.18 4000 Trying 10.10.0.18... Connected to 10.10.0.18. Escape character is '^]'.

alif_asic01 4000 [115200 N81]

Booting Linux on physical CPU 0x0 Linux version 5.4.25-00024-g9283a6810958-dirty (nishit@alif) (gcc version 9.2.0 (GCC)) #72 Tue Apr 20 15:41:31 IST 2021 #HGG1 CPU: ARMv8-a aarch32 Processor [411fd010] revision 0 (ARMv8), cr=50c5383d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache #HGG1.1 OF: fdt: Machine model: corstone700

[PFA] yaml job

thanks

Regards Nagendra S