The I2C protocol allows zero-length requests with no data, like the SMBus Quick command, where the command is inferred based on the read/write flag itself.
In order to allow such a request, allocate another bit, VIRTIO_I2C_FLAGS_M_RD(1), in the flags to pass the request type, as read or write. This was earlier done using the read/write permission to the buffer itself.
This still won't work well if multiple buffers are passed for the same request, i.e. the write-read requests, as the VIRTIO_I2C_FLAGS_M_RD flag can only be used with a single buffer.
Coming back to it, there is no need to send multiple buffers with a single request. All we need, is a way to group several requests together, which we can already do based on the VIRTIO_I2C_FLAGS_FAIL_NEXT flag.
Remove support for multiple buffers within a single request.
Add a new feature flag for zero length requests and make it mandatory for it to be implemented, so we don't need to drag the old implementation around.
Fixes: https://github.com/oasis-tcs/virtio-spec/issues/112 Signed-off-by: Viresh Kumar viresh.kumar@linaro.org --- V3->V4: - Add a new mandatory feature flag.
V2->V3: - Add conformance clauses that require that the flag is consistent with the buffer.
V1->V2: - Name the buffer-less request as zero-length request.
Hi Guys,
I did try to follow the discussion you guys had during V4, where we added support for multiple buffers for the same request, which I think is unnecessary now, after introduction of the VIRTIO_I2C_FLAGS_FAIL_NEXT flag.
https://lists.oasis-open.org/archives/virtio-comment/202011/msg00005.html
And so starting this discussion again, because we need to support stuff like: i2cdetect -q <i2c-bus-number>, which issues a zero-length SMBus Quick command. --- virtio-i2c.tex | 76 ++++++++++++++++++++++++++++++-------------------- 1 file changed, 45 insertions(+), 31 deletions(-)
diff --git a/virtio-i2c.tex b/virtio-i2c.tex index 949d75f44158..0e73348963ce 100644 --- a/virtio-i2c.tex +++ b/virtio-i2c.tex @@ -17,7 +17,11 @@ \subsection{Virtqueues}\label{sec:Device Types / I2C Adapter Device / Virtqueues
\subsection{Feature bits}\label{sec:Device Types / I2C Adapter Device / Feature bits}
-None currently defined. +\begin{description} +\item[VIRTIO_I2C_F_ZERO_LENGTH_REQUEST (0)] The device supports zero-length I2C +request and \field{VIRTIO_I2C_FLAGS_M_RD} flag. It is mandatory to implement +this feature. +\end{description}
\subsection{Device configuration layout}\label{sec:Device Types / I2C Adapter Device / Device configuration layout}
@@ -54,8 +58,7 @@ \subsubsection{Device Operation: Request Queue}\label{sec:Device Types / I2C Ada \begin{lstlisting} struct virtio_i2c_req { struct virtio_i2c_out_hdr out_hdr; - u8 write_buf[]; - u8 read_buf[]; + u8 buf[]; struct virtio_i2c_in_hdr in_hdr; }; \end{lstlisting} @@ -84,16 +87,16 @@ \subsubsection{Device Operation: Request Queue}\label{sec:Device Types / I2C Ada and sets it on the other requests. If this bit is set and a device fails to process the current request, it needs to fail the next request instead of attempting to execute it. + +\item[VIRTIO_I2C_FLAGS_M_RD(1)] is used to mark the request as READ or WRITE. \end{description}
Other bits of \field{flags} are currently reserved as zero for future feature extensibility.
-The \field{write_buf} of the request contains one segment of an I2C transaction -being written to the device. - -The \field{read_buf} of the request contains one segment of an I2C transaction -being read from the device. +The \field{buf} of the request is optional and contains one segment of an I2C +transaction being read from or written to the device, based on the value of the +\field{VIRTIO_I2C_FLAGS_M_RD} bit in the \field{flags} field.
The final \field{status} byte of the request is written by the device: either VIRTIO_I2C_MSG_OK for success or VIRTIO_I2C_MSG_ERR for error. @@ -103,27 +106,27 @@ \subsubsection{Device Operation: Request Queue}\label{sec:Device Types / I2C Ada #define VIRTIO_I2C_MSG_ERR 1 \end{lstlisting}
-If ``length of \field{read_buf}''=0 and ``length of \field{write_buf}''>0, -the request is called write request. +If \field{VIRTIO_I2C_FLAGS_M_RD} bit is set in the \field{flags}, then the +request is called a read request.
-If ``length of \field{read_buf}''>0 and ``length of \field{write_buf}''=0, -the request is called read request. +If \field{VIRTIO_I2C_FLAGS_M_RD} bit is unset in the \field{flags}, then the +request is called a write request.
-If ``length of \field{read_buf}''>0 and ``length of \field{write_buf}''>0, -the request is called write-read request. It means an I2C write segment followed -by a read segment. Usually, the write segment provides the number of an I2C -controlled device register to be read. +The \field{buf} is optional and will not be present for a zero-length request, +like SMBus Quick.
-The case when ``length of \field{write_buf}''=0, and at the same time, -``length of \field{read_buf}''=0 doesn't make any sense. +The virtio I2C protocol supports write-read requests, i.e. an I2C write segment +followed by a read segment (usually, the write segment provides the number of an +I2C controlled device register to be read), by grouping a list of requests +together using the \field{VIRTIO_I2C_FLAGS_FAIL_NEXT} flag.
\subsubsection{Device Operation: Operation Status}\label{sec:Device Types / I2C Adapter Device / Device Operation: Operation Status}
-\field{addr}, \field{flags}, ``length of \field{write_buf}'' and ``length of \field{read_buf}'' -are determined by the driver, while \field{status} is determined by the processing -of the device. A driver puts the data written to the device into \field{write_buf}, while -a device puts the data of the corresponding length into \field{read_buf} according to the -request of the driver. +\field{addr}, \field{flags}, and ``length of \field{buf}'' are determined by the +driver, while \field{status} is determined by the processing of the device. A +driver, for a write request, puts the data to be written to the device into the +\field{buf}, while a device, for a read request, puts the data read from device +into the \field{buf} according to the request from the driver.
A driver may send one request or multiple requests to the device at a time. The requests in the virtqueue are both queued and processed in order. @@ -137,15 +140,22 @@ \subsubsection{Device Operation: Operation Status}\label{sec:Device Types / I2C
\drivernormative{\subsubsection}{Device Operation}{Device Types / I2C Adapter Device / Device Operation}
+A driver SHOULD implement the VIRTIO_I2C_F_ZERO_LENGTH_REQUEST feature. + A driver MUST set \field{addr} and \field{flags} before sending the request.
A driver MUST set the reserved bits of \field{flags} to be zero.
-The driver MUST NOT send a request with ``length of \field{write_buf}''=0 and -``length of \field{read_buf}''=0 at the same time. +A driver MUST NOT send the \field{buf}, for a zero-length request. + +A driver MUST NOT use \field{buf}, for a read request, if the final +\field{status} returned from the device is VIRTIO_I2C_MSG_ERR. + +A driver MUST set the \field{VIRTIO_I2C_FLAGS_M_RD} flag for a read operation, +where the buffer is write-only for the device.
-A driver MUST NOT use \field{read_buf} if the final \field{status} returned -from the device is VIRTIO_I2C_MSG_ERR. +A driver MUST NOT set the \field{VIRTIO_I2C_FLAGS_M_RD} flag for a write +operation, where the buffer is read-only for the device.
A driver MUST queue the requests in order if multiple requests are going to be sent at a time. @@ -157,14 +167,18 @@ \subsubsection{Device Operation: Operation Status}\label{sec:Device Types / I2C
\devicenormative{\subsubsection}{Device Operation}{Device Types / I2C Adapter Device / Device Operation}
+A device SHOULD implement the VIRTIO_I2C_F_ZERO_LENGTH_REQUEST feature. + A device SHOULD keep consistent behaviors with the hardware as described in \hyperref[intro:I2C]{I2C}.
-A device MUST NOT change the value of \field{addr}, reserved bits of \field{flags} -and \field{write_buf}. +A device MUST NOT change the value of \field{addr}, and reserved bits of +\field{flags}. + +A device MUST not change the value of the \field{buf} for a write request.
-A device MUST place one I2C segment of the corresponding length into \field{read_buf} -according the driver's request. +A device MUST place one I2C segment of the ``length of \field{buf}'', for the +read request, into the \field{buf} according the driver's request.
A device MUST guarantee the requests in the virtqueue being processed in order if multiple requests are received at a time.