This patch adds basic support for configuring and assisting generic Virtio backend which could run in any domain.
An example of domain configuration for mmio based Virtio I2C device is: virtio = ["type=virtio,device22,transport=mmio"]
Also to make this work on Arm, allocate Virtio MMIO params (IRQ and memory region) and pass them to the backend. Update guest device-tree as well to create a DT node for the Virtio devices.
Signed-off-by: Viresh Kumar viresh.kumar@linaro.org --- tools/libs/light/Makefile | 1 + tools/libs/light/libxl_arm.c | 89 +++++++++++++++ tools/libs/light/libxl_create.c | 5 + tools/libs/light/libxl_internal.h | 1 + tools/libs/light/libxl_types.idl | 29 +++++ tools/libs/light/libxl_types_internal.idl | 1 + tools/libs/light/libxl_virtio.c | 127 ++++++++++++++++++++++ 7 files changed, 253 insertions(+) create mode 100644 tools/libs/light/libxl_virtio.c
diff --git a/tools/libs/light/Makefile b/tools/libs/light/Makefile index 374be1cfab25..4fddcc6f51d7 100644 --- a/tools/libs/light/Makefile +++ b/tools/libs/light/Makefile @@ -106,6 +106,7 @@ OBJS-y += libxl_vdispl.o OBJS-y += libxl_pvcalls.o OBJS-y += libxl_vsnd.o OBJS-y += libxl_vkb.o +OBJS-y += libxl_virtio.o OBJS-y += libxl_genid.o OBJS-y += _libxl_types.o OBJS-y += libxl_flask.o diff --git a/tools/libs/light/libxl_arm.c b/tools/libs/light/libxl_arm.c index b4928dbf673c..f33c9b273a4f 100644 --- a/tools/libs/light/libxl_arm.c +++ b/tools/libs/light/libxl_arm.c @@ -113,6 +113,19 @@ int libxl__arch_domain_prepare_config(libxl__gc *gc, } }
+ for (i = 0; i < d_config->num_virtios; i++) { + libxl_device_virtio *virtio = &d_config->virtios[i]; + + if (virtio->transport != LIBXL_VIRTIO_TRANSPORT_MMIO) + continue; + + rc = alloc_virtio_mmio_params(gc, &virtio->base, &virtio->irq, + &virtio_mmio_base, &virtio_mmio_irq); + + if (rc) + return rc; + } + /* * Every virtio-mmio device uses one emulated SPI. If Virtio devices are * present, make sure that we allocate enough SPIs for them. @@ -968,6 +981,68 @@ static int make_virtio_mmio_node(libxl__gc *gc, void *fdt, uint64_t base, return fdt_end_node(fdt); }
+static int make_virtio_mmio_node_i2c(libxl__gc *gc, void *fdt) +{ + int res; + + res = fdt_begin_node(fdt, "i2c"); + if (res) return res; + + res = fdt_property_compat(gc, fdt, 1, "virtio,device22"); + if (res) return res; + + return fdt_end_node(fdt); +} + +static int make_virtio_mmio_node_gpio(libxl__gc *gc, void *fdt) +{ + int res; + + res = fdt_begin_node(fdt, "gpio"); + if (res) return res; + + res = fdt_property_compat(gc, fdt, 1, "virtio,device29"); + if (res) return res; + + res = fdt_property(fdt, "gpio-controller", NULL, 0); + if (res) return res; + + res = fdt_property_cell(fdt, "#gpio-cells", 2); + if (res) return res; + + res = fdt_property(fdt, "interrupt-controller", NULL, 0); + if (res) return res; + + res = fdt_property_cell(fdt, "#interrupt-cells", 2); + if (res) return res; + + return fdt_end_node(fdt); +} + +static int make_virtio_mmio_node_device(libxl__gc *gc, void *fdt, uint64_t base, + uint32_t irq, const char *type, + uint32_t backend_domid) +{ + int res, len = strlen(type); + + res = make_virtio_mmio_node_common(gc, fdt, base, irq, backend_domid); + if (res) return res; + + /* Add device specific nodes */ + if (!strncmp(type, "virtio,device22", len)) { + res = make_virtio_mmio_node_i2c(gc, fdt); + if (res) return res; + } else if (!strncmp(type, "virtio,device29", len)) { + res = make_virtio_mmio_node_gpio(gc, fdt); + if (res) return res; + } else { + LOG(ERROR, "Invalid type for virtio device: %s", type); + return -EINVAL; + } + + return fdt_end_node(fdt); +} + static const struct arch_info *get_arch_info(libxl__gc *gc, const struct xc_dom_image *dom) { @@ -1290,6 +1365,20 @@ static int libxl__prepare_dtb(libxl__gc *gc, libxl_domain_config *d_config, } }
+ for (i = 0; i < d_config->num_virtios; i++) { + libxl_device_virtio *virtio = &d_config->virtios[i]; + + if (virtio->transport != LIBXL_VIRTIO_TRANSPORT_MMIO) + continue; + + if (virtio->backend_domid != LIBXL_TOOLSTACK_DOMID) + iommu_needed = true; + + FDT( make_virtio_mmio_node_device(gc, fdt, virtio->base, + virtio->irq, virtio->type, + virtio->backend_domid) ); + } + /* * Note, this should be only called after creating all virtio-mmio * device nodes diff --git a/tools/libs/light/libxl_create.c b/tools/libs/light/libxl_create.c index 612eacfc7fac..15a32c75c045 100644 --- a/tools/libs/light/libxl_create.c +++ b/tools/libs/light/libxl_create.c @@ -1802,6 +1802,11 @@ static void domcreate_launch_dm(libxl__egc *egc, libxl__multidev *multidev, &d_config->vkbs[i]); }
+ for (i = 0; i < d_config->num_virtios; i++) { + libxl__device_add(gc, domid, &libxl__virtio_devtype, + &d_config->virtios[i]); + } + if (d_config->b_info.arch_arm.vuart == LIBXL_VUART_TYPE_SBSA_UART) { init_console_info(gc, &vuart, 0); vuart.backend_domid = state->console_domid; diff --git a/tools/libs/light/libxl_internal.h b/tools/libs/light/libxl_internal.h index cb9e8b3b8b5a..e5716f9bef80 100644 --- a/tools/libs/light/libxl_internal.h +++ b/tools/libs/light/libxl_internal.h @@ -4003,6 +4003,7 @@ static inline int *libxl__device_type_get_num(
extern const libxl__device_type libxl__vfb_devtype; extern const libxl__device_type libxl__vkb_devtype; +extern const libxl__device_type libxl__virtio_devtype; extern const libxl__device_type libxl__disk_devtype; extern const libxl__device_type libxl__nic_devtype; extern const libxl__device_type libxl__vtpm_devtype; diff --git a/tools/libs/light/libxl_types.idl b/tools/libs/light/libxl_types.idl index d634f304cda2..d97a0795d312 100644 --- a/tools/libs/light/libxl_types.idl +++ b/tools/libs/light/libxl_types.idl @@ -278,6 +278,14 @@ libxl_vkb_backend = Enumeration("vkb_backend", [ (2, "LINUX") ])
+libxl_virtio_backend = Enumeration("virtio_backend", [ + (1, "STANDALONE") + ]) + +libxl_virtio_transport = Enumeration("virtio_transport", [ + (1, "MMIO"), + ]) + libxl_passthrough = Enumeration("passthrough", [ (0, "default"), (1, "disabled"), @@ -705,6 +713,17 @@ libxl_device_vkb = Struct("device_vkb", [ ("multi_touch_num_contacts", uint32) ])
+libxl_device_virtio = Struct("device_virtio", [ + ("backend_domid", libxl_domid), + ("backend_domname", string), + ("backend", libxl_virtio_backend), + ("type", string), + ("transport", libxl_virtio_transport), + ("devid", libxl_devid), + ("irq", uint32), + ("base", uint64) + ]) + libxl_device_disk = Struct("device_disk", [ ("backend_domid", libxl_domid), ("backend_domname", string), @@ -982,6 +1001,7 @@ libxl_domain_config = Struct("domain_config", [ ("dtdevs", Array(libxl_device_dtdev, "num_dtdevs")), ("vfbs", Array(libxl_device_vfb, "num_vfbs")), ("vkbs", Array(libxl_device_vkb, "num_vkbs")), + ("virtios", Array(libxl_device_virtio, "num_virtios")), ("vtpms", Array(libxl_device_vtpm, "num_vtpms")), ("p9s", Array(libxl_device_p9, "num_p9s")), ("pvcallsifs", Array(libxl_device_pvcallsif, "num_pvcallsifs")), @@ -1145,6 +1165,15 @@ libxl_vkbinfo = Struct("vkbinfo", [ ("rref", integer) ], dir=DIR_OUT)
+libxl_virtioinfo = Struct("virtioinfo", [ + ("backend", string), + ("backend_id", uint32), + ("frontend", string), + ("frontend_id", uint32), + ("devid", libxl_devid), + ("state", integer), + ], dir=DIR_OUT) + # NUMA node characteristics: size and free are how much memory it has, and how # much of it is free, respectively. dists is an array of distances from this # node to each other node. diff --git a/tools/libs/light/libxl_types_internal.idl b/tools/libs/light/libxl_types_internal.idl index fb0f4f23d7c2..e24288f1a59e 100644 --- a/tools/libs/light/libxl_types_internal.idl +++ b/tools/libs/light/libxl_types_internal.idl @@ -33,6 +33,7 @@ libxl__device_kind = Enumeration("device_kind", [ (15, "VSND"), (16, "VINPUT"), (17, "VIRTIO_DISK"), + (18, "VIRTIO"), ])
libxl__console_backend = Enumeration("console_backend", [ diff --git a/tools/libs/light/libxl_virtio.c b/tools/libs/light/libxl_virtio.c new file mode 100644 index 000000000000..14b0c016a0a2 --- /dev/null +++ b/tools/libs/light/libxl_virtio.c @@ -0,0 +1,127 @@ +/* + * Copyright (C) 2022 Linaro Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as published + * by the Free Software Foundation; version 2.1 only. with the special + * exception on linking described in file LICENSE. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + */ + +#include "libxl_internal.h" + +static int libxl__device_virtio_setdefault(libxl__gc *gc, uint32_t domid, + libxl_device_virtio *virtio, + bool hotplug) +{ + return libxl__resolve_domid(gc, virtio->backend_domname, + &virtio->backend_domid); +} + +static int libxl__device_from_virtio(libxl__gc *gc, uint32_t domid, + libxl_device_virtio *virtio, + libxl__device *device) +{ + device->backend_devid = virtio->devid; + device->backend_domid = virtio->backend_domid; + device->devid = virtio->devid; + device->domid = domid; + + device->backend_kind = LIBXL__DEVICE_KIND_VIRTIO; + device->kind = LIBXL__DEVICE_KIND_VIRTIO; + + return 0; +} + +static int libxl__set_xenstore_virtio(libxl__gc *gc, uint32_t domid, + libxl_device_virtio *virtio, + flexarray_t *back, flexarray_t *front, + flexarray_t *ro_front) +{ + const char *transport = libxl_virtio_transport_to_string(virtio->transport); + + flexarray_append_pair(back, "irq", GCSPRINTF("%u", virtio->irq)); + flexarray_append_pair(back, "base", GCSPRINTF("%lu", virtio->base)); + flexarray_append_pair(back, "type", GCSPRINTF("%s", virtio->type)); + flexarray_append_pair(back, "transport", GCSPRINTF("%s", transport)); + + flexarray_append_pair(front, "irq", GCSPRINTF("%u", virtio->irq)); + flexarray_append_pair(front, "base", GCSPRINTF("%lu", virtio->base)); + flexarray_append_pair(front, "type", GCSPRINTF("%s", virtio->type)); + flexarray_append_pair(front, "transport", GCSPRINTF("%s", transport)); + + return 0; +} + +static int libxl__virtio_from_xenstore(libxl__gc *gc, const char *libxl_path, + libxl_devid devid, + libxl_device_virtio *virtio) +{ + const char *be_path, *fe_path, *tmp; + libxl__device dev; + int rc; + + virtio->devid = devid; + + rc = libxl__xs_read_mandatory(gc, XBT_NULL, + GCSPRINTF("%s/backend", libxl_path), + &be_path); + if (rc) goto out; + + rc = libxl__xs_read_mandatory(gc, XBT_NULL, + GCSPRINTF("%s/frontend", libxl_path), + &fe_path); + if (rc) goto out; + + rc = libxl__backendpath_parse_domid(gc, be_path, &virtio->backend_domid); + if (rc) goto out; + + rc = libxl__parse_backend_path(gc, be_path, &dev); + if (rc) goto out; + + rc = libxl__xs_read_checked(gc, XBT_NULL, + GCSPRINTF("%s/irq", be_path), &tmp); + if (rc) goto out; + + if (tmp) { + virtio->irq = strtoul(tmp, NULL, 0); + } + + rc = libxl__xs_read_checked(gc, XBT_NULL, + GCSPRINTF("%s/base", be_path), &tmp); + if (rc) goto out; + + if (tmp) { + virtio->base = strtoul(tmp, NULL, 0); + } + + rc = 0; + +out: + + return rc; +} + +static LIBXL_DEFINE_UPDATE_DEVID(virtio) + +#define libxl__add_virtios NULL +#define libxl_device_virtio_compare NULL + +DEFINE_DEVICE_TYPE_STRUCT(virtio, VIRTIO, virtios, + .set_xenstore_config = (device_set_xenstore_config_fn_t) + libxl__set_xenstore_virtio, + .from_xenstore = (device_from_xenstore_fn_t)libxl__virtio_from_xenstore, + .skip_attach = 1 +); + +/* + * Local variables: + * mode: C + * c-basic-offset: 4 + * indent-tabs-mode: nil + * End: + */